Has anyone done this or seen this done for the mitsubishi 8g galant key
http://img02.taobaocdn.com/bao/uploa...OTa_091513.jpg
Printable View
Has anyone done this or seen this done for the mitsubishi 8g galant key
http://img02.taobaocdn.com/bao/uploa...OTa_091513.jpg
I haven't. I'm not sure of the key's structure under the plastic part, but the transponder chip to neutralize the immobilizer is in there and I'm not sure how modifying the key will affect its operation. But if you got a mind to try it out, I wouldn't mind seeing what you do, but I'd try it on a valet key first.
45 views and 1 response.
Ok I guess I’ll try it out.
Subscribe and stay tuned for pictures and explanations on how to do or if it’s even possible.
I dont care enough of what my key looks like to do this.
Its either in my back pocket, or in the ignition
Don’t like having too much on my key chain so if I can combine 2 into 1 I’m doing it… Wish I could have my keys like a Swiss knife lol
I did it not too long ago. My car doesnt have remote door locks so its empty inside. I used an evo fob like this:
http://www.ebay.com/itm/320824801603...84.m1497.l2649
Then I had another key made which replaced the blank key in the fob.
Here's a quick tutorial, but its in VW fob. The internals are the same.
http://www.galantvr4.org/ubbthreads/...1011887&Forum=
the trick is that i have a 3 button clicker. lock/unlock/trunk
wonder if the junk yard will give me one to take apart. will find out today
http://www.ecutool.com/Mitsubishi-3-...hell_9981.html
i found this on the web. wondering if its going to work
just a heads up OP. some car alarms feature flip out keys.
http://www.trademe.co.nz/motors/car-...-535156748.htm for example.
http://www.ecutool.com/Mitsubishi-Fl...tton_4728.html is another
Meh I hate the new flip keys and keys with buttons built in. In fact I hate factory keyless and security.
For me there's nothing like the look of this:
http://i1199.photobucket.com/albums/...-15-36_209.jpg
Plain key with Viper remote starter (My 14MPG Daily :FML:)
as much as i would like to do this, it wont work due to the way the key portion is backward, if you look and compare it to your key you will see what im saying.
you need a left key blade
they have many different types of keys you can put on their
they make blank Mitsubishi flip keys
---> http://images.trademe.co.nz/photoser...58248_full.jpg <---
We can offer the blank keys for most of the types for the car brands below:
1- TOYOTA
2- NISSAN
3- MAZDA
4- MITSUBISHI
5- HONDA
6- SUBARU
7- Isuzu
Well that even better! it was late when I read the posts, so I might look into this more,
Sent from my PC36100 using Tapatalk 2
The guy who makes them lives in Waitakere City of New Zealand.
Cheaper is we bundle and instal ourselves. Excited for this.
I'll be shooting out an email some time this week to figure out if it will ne a direct fit for the controller board for the keyless entry, on anything ill be the funny pig in this since it will be cheap
Sent from my PC36100 using Tapatalk 2
This is another flip key remote I found
This has lock, unlock, and trunk. Witch is what I need but don't know if the original board will fit or line up in this
http://i27.photobucket.com/albums/c1...e/IMAG0730.jpg
Very interested in this but I don't have the trunk button on my remote. Does he just offer the shell with just the lock/unlock buttons?
Sent from my HTC Sensation 4G using Tapatalk 2
It's easier finding two button shells than three. Finald8 has the two button and he will post on here or text me when he gets an email back from the company. We want to make sure there is no mods necessary if we get it
Went to a locksmith today to see if it was possible to make the flip key conversion.
I was told because the car key requires a chip to turn on the car it will not be possible to make it.
I still have hope
Ask your nearest locksmith if it is possible
we can do this and glue it inside the shell
http://youtu.be/6i1PyvkpZF0