Printable View
i have a 98 galant es..just got a magnaflow ehuast(muffler not the whole system) and a custom cold air intake. besides the whole exhasut system im not really sure what other performance parts a can put into my car besides going turbo..now for the turbo i cant realy find anything for the galant..does anybody no what turbo, intercooler kit, ect and what ever i need for this to happen?
2g turbo parts, custom intercooler piping, also look deeper into the performance Mods for the 7g section.
what parts specific..im new to this shit im going from a grand prix to the galant..tutorials on the custom intercoolin piping? what about the intercooler(radiator) itsself?
First off..read this thread, it may answer most of your questions
https://thegalantcenter.net/forum/viewtopic.php?t=28756
You will need a exhaust manifold from either a 1g or 2g turbo DSM...preferrably a 2g since it flows better and less prone to cracking. Any MHI turbo (Mitsubishi turbo) *13g, 14b, 16g, big 16g, EVO III 16g, 18g, 20g...as long it has a mitsu flange to work on a 1g or 2g manifold. You can run the stock 450cc injectors or bigger, the resistor pack since Mitsu turbo injector run low inpendence, 2g FWD dowpipe, etc etc.
You though will have to get custom made are the intercooler piping, exhaust piping because there isn't a true setup you can buy. You could try to be a 2g intercooler piping kit..but there might be some issues on fitting it. You can use any Front mount intercooler you want..you will just have to frabricate custom brackets to bolt it on and you will have to make modifactions to make it fit right especially on the bumper and bumper support if you choose to keep it.
Here is a video I made of the progress I made to turbo my 7g. You will get somewhat of a idea what things to expect and what you will need to go turbo. Its not a installation video...just gives you somewhat of a idea.
http://www.wikiupload.com/download_page.php?id=126800
Or you can go insane like what i am working on and get a Holset HX-50 turbo from a turbo diesel... and yes, those have the mitsu flangeQuote:
Originally Posted by 4-G-rim
When do you plan to spool on that thing? My boy has the hx35 and it doesn't spool till 3700. Hx50 is probably close to 4500 so you only have 2000 rpm's in boost on your 2.4?Quote:
Originally Posted by frag_daddy_2007
Its really just to say i can, but im buying it from a friend. he modded it and its sort of a frankenturbo... it has the hx50 front, but has a little ass 40trim exhaust side. so its a 75trim and a 40 trim stuck together. he was spooling it about 3000rpm on his 4g64 eclipse
Ok that sounds betterQuote:
Its really just to say i can, but im buying it from a friend. he modded it and its sort of a frankenturbo... it has the hx50 front, but has a little ass 40trim exhaust side. so its a 75trim and a 40 trim stuck together. he was spooling it about 3000rpm on his 4g64 eclipse