need help,ecu,wiring,turbo etc...
ok well its been awhile since i posted on here but i just wanted to make sure i have everything right. so i have a 98 galant 2.4 sohc turbo running 10 psi. i am using a gm 3 inch mas and a maft. i have 450cc injectors. full 3 inch mangnaflow exhaust ported 02 housing, aem wideband,
well i have been turbo now for about 3 months and i have gathered more and more parts. i just recently picked up a 2g eprom ecu and in the midst of getting a 2g knock sensor if i can find one. well my first question is will coil pack assembly off of a 90 talon tsi work? i know that the 1g knock sensor wont work but havent found anybody say that the coil pack assembly differs from a 2g. as i have a 90 tsi parts car. if somebody could give me a detailed list of everything i basically need to swap a 2g ecu. my second question is does anybody know a good place to get a chip burner and a socket so i can burn chips etc. i have a real good understanding off the engine and turbo setup just kinda foggy on where to get eeprom sockets and chips and tuning software any help would be great.