How to: Install OEM 94-96 Accord Lip on a 7G
OP Notes: Yeah like the title states, it was a hit or miss project randomly created by me. I used Warren's 7gB front bumper even though I originally tested on a 7gA bumper (at a junkyard). If you're wondering about the 8g then yes, it does fit 8g there's a tutorial for that lol!
How to: Install OEM 94-96 Accord Lip (CD5) on a 7G
EDIT***: I test fitted this lip on a 7Ga bumper (again) and it fits
Before we get started, I need to let you guys what lip I'm talking about.....
http://memimage.cardomain.com/ride_i...0003_large.jpg
This is an oem lip (or front underspoiler as depicted in this picture) found in 1994-1996 Honda Accord sedan & coupe models. You can find this lip at junkyards across the country and you can snatch one for a good price of $12-30 depending on the location. All you need is a 10mm and a 12mm socket and it takes 10 minutes to remove.
Here's what you need:
http://i70.photobucket.com/albums/i9...c/DSCN3069.jpg
- Front bumper from a USDM 7G (1994-1998)
- some sort of cutting tool (Dremel, power cutter, heavy duty scissors) (omit that not necessary)
- double sided tape
- about 16 lathe screws /w washers
- Phillip head screwdriver/drill head
NOTE: You do not need to cut the upper tab. You need it to screw in under the bumper.
http://i70.photobucket.com/albums/i9...c/DSCN3071.jpg
EDIT***: I discovered not to cut the entire top tab to make it fit since it was designed as an underspoiler.
http://i70.photobucket.com/albums/i9...c/DSCN3073.jpg
We added double sided tape and then laced it with screws. Since it was a 95% fit no heat gun is necessary like a Mugen lip would.
And wala.... it fits
http://i70.photobucket.com/albums/i9...c/DSCN3206.jpg
http://i70.photobucket.com/albums/i9...c/DSCN3229.jpg
http://i70.photobucket.com/albums/i9...c/DSCN3221.jpg
http://i70.photobucket.com/albums/i9...c/DSCN3080.jpg
http://i70.photobucket.com/albums/i9...c/DSCN3081.jpg
http://i70.photobucket.com/albums/i9...c/DSCN3082.jpg