-
Greg's Legnum VR-4
-
Got sidetracked to updating this, so here is more.
Sitting on the ferry on the drive home from Vancouver after pickup, like a late Christmas present
https://fbcdn-sphotos-a-a.akamaihd.n...17838913_n.jpg
BC Inspection decal, and certification from the port of Kawasaki that my car is radiation free
https://fbcdn-sphotos-a-a.akamaihd.n...80920696_n.jpg
A mere 134,000km. Just breaking her in.
https://fbcdn-sphotos-d-a.akamaihd.n...40035630_n.jpg
'The goods'. Came with a dirty gross and weird stainless steel mesh cold air intake. Replaced with a nice K&N clean one.
https://fbcdn-sphotos-b-a.akamaihd.n...06608314_n.jpg
Browsing Ebay, and I found a brochure from the manufacturer.
https://fbcdn-sphotos-c-a.akamaihd.n...96464184_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.n...61956800_n.jpg
-
-
LED reverse lights because why not?
https://fbcdn-sphotos-d-a.akamaihd.n...21635027_n.jpg
Had it detailed before my wife and I took a 12 day roadtrip of the US
https://fbcdn-sphotos-b-a.akamaihd.n...66754767_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.n...68901805_n.jpg
It did not come home looking that nice...But we did our part killing bugs with it.
Finally, picked up some new LED headlights
https://fbcdn-sphotos-b-a.akamaihd.n...75577436_n.jpg
-
Car looks good how much you pay in total if you don't mind me asking both cars to the right and left of it were nice cars as well
-
All in, car price at auction, shipping, taxes, duty, misc fees, inspection, etc...I was looking at about $4000 drive away. Can't beat that.
-
That's not bad makes me want to get one
-
Unfortunately for the US, they have a 25 year restriction for importing, whereas Canada only has a 15 year.
-
Pulled the centre console out to play with some new ideas for a stereo...
https://fbcdn-sphotos-g-a.akamaihd.n...81203814_n.jpg
-
-
Haha, I was planning on it. I took my old crappy JDM stereo out.
https://fbcdn-sphotos-c-a.akamaihd.n...19423523_n.jpg
Pulled all the bits of it off I didn't need
https://scontent-b-pao.xx.fbcdn.net/...08432908_n.jpg
What I'm keeping that I will use to mount the tablet in a case to. I just have to trim the black bit back to be in line with the silver sides, and it'll fit nicely.
https://fbcdn-sphotos-e-a.akamaihd.n...80912036_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.n...78152774_n.jpg
Test fitting it back in. Should work nicely.
https://fbcdn-sphotos-a-a.akamaihd.n...10378366_n.jpg
My plan is to put a single DIN deck in the empty spot below, that used to hold pens, and run the rear AUX to the tablet, then find the right tasker so the tablet is on when there is power, and off when no power going to it. I'm not sure exactly what I'm going to power it to yet, but probably my cigarette lighter. I'll research what others have done on that front more soon.
-
What I'd do is wire in a hidden cigarette lighter socket and put it inside the console and plug the tablet's car charger up to that. It would require a separate fused power wire and ground wire, and possible a relay with the remote trigger from the single DIN unit you plan to install as the relay's trigger. That's one way, I'm sure there are other ways.
-
Yeah, I'm not sure yet. I'm gonna stop by a car audio place in the next little bit and see what they say, or if they can help me to make sure it's done right.
-
Had a random misfire lately, this should take care of it...
https://fbcdn-sphotos-h-a.akamaihd.n...68132599_n.jpg