-
wtf??? intake problems
hey guys. i got a 06 galant 2.4l auto and i was trying to get some better gas milage out of it so i made an intake for it. i removed the old air box and installed a short ram intake. after driving it for about 15 minutes the check engine light came on and it throwing a "system too lean bank one and 2". i check the 1 vacuum hose it has to the intake and made sure it was hooked up and sure enough... it was. i erased the code and it came back on after driving it for another 10 minutes. has any one had this problem before when in stalling an intake on there 9g?
-
Do you still have the MAF installed?
-
yes. i got an adapter to use the maf but its right behide the air fiter. the o ring is sealed tight in the adapter so it shouldnt be leaking from there either.
-
Maybe you should try resetting the ecu. BTW. did you install the maf correctly?
-
hmmm maybe u didnt disconnect the battery while installing?..
-
u made an intake? the sensor is pretty sensitive, even injen hand problems at first with the check light... buy a fujita, problem would be solved
-
Generally I'd say reset the ecu, its probaly sensing the wrong airflow, since you are increasing flow thats probaly why you get the light/error codes, reset the ecu and see if it throws you the same code, had this problem on a few cars back in the past, resetting worked wonders.
-
How does the engine idle? / Any Problems driving at all? or Just the light?
-
the car ran fine but and it was just a light. i took it off and the light never cam back on so in just going to buy a regular in take just for the car... just got to save some money.