Help with the Mitah.

I got everything ready to install a Kenwood.

I ordered the (Mitah / Wire harness) package but it came with out instructions. I know how to hook up the wire harness but Im a little confussed as to what am I suppose to hook up the blue wire from the mitah to.

http://www.autotoys.com/x/catalog/MITSUBIS...ESS_p_1379.html

thanks in advance

Quote:

---

Originally Posted by SLS2000

I got everything ready to install a Kenwood.

I ordered the (Mitah / Wire harness) package but it came with out instructions. I know how to hook up the wire harness but Im a little confussed as to what am I suppose to hook up the blue wire from the mitah to.

http://www.autotoys.com/x/catalog/MITSUBIS...ESS_p_1379.html

thanks in advance

---

If I'm not mistaken the blue wire goes to a switched (ignition on) 12 volt source. This is so you don't leave the head unit on without the ignition being hot.

Quote:

---

Originally Posted by Fishboy55

If I'm not mistaken the blue wire goes to a switched (ignition on) 12 volt source. This is so you don't leave the head unit on without the ignition being hot.

---

which is pretty much the blue wire coming out of the radio which can be used for a power antenna or aftermarket amplifier???
( if this is the case than thats what I thought but Im just trying to make sure so as to not damage the factory amp)

Quote:

---

Originally Posted by Fishboy55

If I'm not mistaken the blue wire goes to a switched (ignition on) 12 volt source. This is so you don't leave the head unit on without the ignition being hot.

---

You're right but for the wrong reason. The blue wire from the mitah is the amp turn on wire. That will get hooked up to the blue/white wire from the kenwood radio.

Quote:

---

Originally Posted by cntrylvr79

You're right but for the wrong reason. The blue wire from the mitah is the amp turn on wire. That will get hooked up to the blue/white wire from the kenwood radio.

---

Thank you!!!

close thread and pin it! :laughing: :laughing: :laughing: