Who went to the track with their galant with the 4g64 block and the 4g63 head?turbo or non turbo.
What time did you guys put?
Printable View
Who went to the track with their galant with the 4g64 block and the 4g63 head?turbo or non turbo.
What time did you guys put?
idk if anyone actually got a time... but i think with a lot of practice, and good track preperation i could take that setup into the high 13's N/A
Completely stock, ive got 15.1.
But that's with the sohc?5speed?Quote:
Originally Posted by shovelman
i think mine's about 24.9.. bwahahahahaha..
2.4L SOHC, auto. The auto will probably give you a shorter time by around a tenth.
Stock auto 7g you got a 15.1? BS? Yes!
I'm gonna have to agree with you, unless he used the sawzall treatment.Quote:
Originally Posted by seth98esT
Good bye, rear tire, rear seat, passanger seat.
So totally gutted.
were now to possible.
not gutted, just track prepared. i guess i shouldve specified that when i said the time. i believe mitsu. claims in the neighborhood of high 15s w/ a 7g.
How many PSI in the front tires, how many in the rear.
32-34ish front and rear.
So you didnt go to the track? Its just a guesstimate? A stock auto gutted 7g is probably only a mid 16s car.Quote:
Originally Posted by shovelman
Yes i think a 2.4l sohc auto, a 16-17,15?? y don't think soQuote:
Originally Posted by seth98esT
The 7g are lighter but I dont think they are that light.
I have to agree. Mine with P&P head, Intake manifold, 60mm TB, short ram intake, and muffler ran a mid 15 (15.693 @ 87.87mph on my best run to be exact) with a freshly rebuilt auto. That was with Falkin Azenis on the front and full interior w/75lb sub in the trunk. Stock I ran a 16.8ish with approximately the same weight redux stated above (sorry I don't have the exact numbers, I did that testing with a G-tech not actual dragstrip). Now going by the rule of thumb that 100lbs = .1 lower ET, you'd have to remove 1000lbs to shave a full second off your ET. The Galant's kinda chunky, but not 1/2 ton of non-essential weight chunky! Just my $0.02Quote:
Originally Posted by seth98esT
And 1lb off the rotating mass i.e. wheels and tires = 10 lbs off the chassis, not to mention the added bennofits to handleing from the reduce unsprung weight.