NOrmal Idle, but it fast idles when cruising /now with video/
Im lost. So I got all AFR dialed in, and my idle is now steady /no fast idling/ at 14.7. If I hold the gas pedal at 2k the RPMs will start going up and down, same thing at 3k and 4k.
When I cruise, Ill get that hick up for a moment at around 10% throttle or mild acceleration just like the throttle position switch gets closed and cuts off the fuel to the engine.
My first guess was the TPS, so I found all tutorials about adjusting the TPS and followed step by step. Now the voltage of TPS is 0.65V.
Also I iadjusted the SAS bolt to spec according to tutorial.
After all that It will still do that hick up at some point. I noticed that when it does it my AFR jumps 3.0 numbers to the rich side /lets say 15 at cruise and it jumps to 12 for a moment/ and it will recover to normal again. Also noticed that when I let off the gas it takes some time for the AFR to go in the lean side /20/. It takes a 3-5 sec to do that.
First thing tomarrow is to get new TB gaskets. i went thru 3 TPS so far and same thing happens. TB was rebuild 3 months ago
Any help will be appreciated.