So just before christmas my clutch f*cked out on me, pedal still had all its feeling as normal but couldn't change gear with the pedal down, since then i've changed the clutch, slave cylinder and just changed the master cylinder today, when I got the old 6 puck clutch off I found one of the springs in centre had been destroyed, so I put a new exedy 5 puck and new thrust bearing in but that didn't help, yesterday I pulled the slave cylinder off and found a lot of sediment around the piston and the piston wasn't returning to the top so I changed that with a new one but that didn't change anything either, today I replaced the master cylinder which had a couple of worn O-rings by the piston, and that still hasn't has any effect, the pedal still feels softer than it should and is pretty slow to come back up
If one has any ideas then it would be appreciated because i'm stumped