How To: 1 mount to 3 mount Tutorial 7G.
Okay so i was told i couldn't use my 1 mount tranny, cause i need a 3 mount Tranny..
Basic tools need.
10mm socket.
12mm socket.
One mount Tranny is a 1G.
Three mount is a 7G.
Both Auto Trannys.
I'll try my best to explain, step by step.
that i did.
First i set the Trannys side by side..
i look @ both.
they look the same but there not.
This a picture of the one mount Tranny.
No Side Mount.
http://i71.photobucket.com/albums/i1.../Galant031.jpg
No Side Mount.
http://i71.photobucket.com/albums/i1.../Galant033.jpg
Here's the picture of the Tranny you want!
http://i71.photobucket.com/albums/i1.../Galant028.jpg
http://i71.photobucket.com/albums/i1.../Galant025.jpg
As you can see on the cases thier completly different.
Heres how to fix that problem.
Take out all the bolts to the one mount tranny first so you Get the feel of what your doing.
http://i71.photobucket.com/albums/i1...Galant0141.jpg
after all the bolts are out around that part of the case do the inner ones..
and that case will pop right off.
Now do the same with the 3 mount tranny.
and u'll have a 3 mount Tranny.
Now thats not the end yet..
Now its time for censor changes!
Step 1.
http://i71.photobucket.com/albums/i1...alant026-1.jpg
See the plug deal under the shifter plug in.( in RED )
its pretty small..it pulls out.
But heres the deal.
See the censor below?.. thats what the picture above is about..
after it's pulled out take off the oil pan.. u'll see this device held in by two 10mm bolts.. Switch em.. but it back on like it was with the other one.
Now thats done!
http://i71.photobucket.com/albums/i1.../Galant017.jpg
Next step.
in the picture below your gonna have to swap em out..
http://i71.photobucket.com/albums/i1...alant025-1.jpg
Theres a pin holding it in that has to be Sqeeze together to get it out..
Next step..
Now this part isn't tricky..
The picture below has two pieces highlighted in red.
now only the one mount Tranny, have censors in that place..ones missing in photo though.
http://i71.photobucket.com/albums/i1...alant021-1.jpg
The three mount tranny are in this position..but the one circled is where the one on the front Case is gonna go..
http://i71.photobucket.com/albums/i1...Galant0191.jpg
Now it's time to move onto the shifter.
http://i71.photobucket.com/albums/i1...alant027-1.jpg
Switch them around Cause plug in's are different..
held on by two 10mm bolts..and the center ones a 12mm.
After all that it's ready to be put in, pluged in.. and filled up.
I will add better pictures later with more of a Hands on thing..
i just gotta clean up the Garage some!
If you have any Questions please feel free to PM me.
or email me @ [email protected]
Thanks, 95GalantOwner!