I am adding an EVO 8 ECU to my 02 G. Since I'm adding the evo ecu will I have to use the resistor pack for the 450cc Injectors or would I be able to tune around them with the ecu?
Printable View
I am adding an EVO 8 ECU to my 02 G. Since I'm adding the evo ecu will I have to use the resistor pack for the 450cc Injectors or would I be able to tune around them with the ecu?
Read man read, there are ways around having to use a resistor pack.
Umm that would be a "search" haha. Theres a lot more to this then you think. Are you still an automatic? Do you plan on running dual ecu's?
yes, dual, evo8 and my stock. I have the resister pack and could just solder it in, but If I don't need it I'd rather not waste the time on it.
from what i understand and i could be wrong you can run any injectors w/ any ecu as long as you wire the injectors correctly 450 should be running on a resistor pack regardless of the ecu.
ok thanks
get the WRX 440cc blue top injectors. I have them in my car (non-turbo at the moment) and they run fine.
the 450cc injectors must have a resistor pack because they are a low independance injector versus ur stock injector which is a high independance injector. it only really takes about half hour to install the resistor pack and all the wiring.
What injectors should I buy so I don't have to splice?
WRX 440cc injectors, I said this before!! :lol:
They're High Impedance, so no need for a resistor pack.
http://i165.photobucket.com/albums/u...tors/00005.jpg
http://i165.photobucket.com/albums/u...Pics/00012.jpg
if you want to buy higher cc
http://www.deatschwerks.com/catalog/...roducts_id=128
Too expensive, go to clubWRX.net, you can get them for 100 shipped there.
Ok, thank you guys.