thats a blackout.
Printable View
thats a blackout.
ok done tinting them here is the before and after shot
http://i281.photobucket.com/albums/k...0223-00119.jpg
http://i281.photobucket.com/albums/k...0223-00129.jpg
um, id edit those pics and remove ur plate number
a friend of mine used Nightshade on her 07 taurus tail lights, 3 coats, and when the lights are on at night you can still clearly see the light, unlike other cars i've seen where it's just a fraction of light, just looks like the light reflecting in them. She also masked off the reverse light section, only put 1 coat on that part. You'd swear they came from the factory like that.
I used NightShades to do mine. I did them recently just last week or so.
Make sure you guys clear them too... Looks a ton better
http://i371.photobucket.com/albums/o...11004-1339.jpg
^^^You didn't smoke the 2nd Gens did you?
Those are the USDM if you look close you can see the 8gb reverse section i think.... or thats a damn good reflection
The secknd time i did it I used vht night shade., did like 4 coats wets sanded the last one lightly after letting it dry thoroughly (overnight) to remove orange peal 4 coats of clear wet sanded that and buffed it to shine..... I upgraded the bulbs to the brighter ones and placed a red led strip between the bumper and tai light assembly for brakes for the bright as fuck sunny phoenix days... Then I ended up backing into a sign and busted o e of them so I'm starting from scratch soon I'll post up pics...
I have some pictures of the first time I tinted the lights but didnt look as good.
Sent from my SPH-L710 using Tapatalk
I used VHT as well. I wetsanded with 1500 then sprayed it on until i liked the shade. I tend to spray thick and they come out glossy instead of flat.
Heres the Galant
http://i10.photobucket.com/albums/a1...1420882_z1.jpg
http://i10.photobucket.com/albums/a1...ps4e2a3840.jpg
Back when she was silver in the sun.
http://i10.photobucket.com/albums/a1...g/_MG_1627.jpg
I've also done red on my Mazda.
http://i10.photobucket.com/albums/a1...3/_MG_2460.jpg
http://i10.photobucket.com/albums/a1...3/_MG_2463.jpg
First time tinting and used 3 Coats of rustoleum tail light tint with no sanding or clear coat after , i picked up a pair of 2003 lights i'm going to have tinted at a shop.
http://i1273.photobucket.com/albums/...zps80f42082.jp
I used plasti dip tail light tint and it help up well
Sent from my LG-MS695 using Tapatalk 2
You're better off buying tail light film, It's fully reversible just in case you wanna revert back to the original
i used LAMIN-X film. went red to get ridda the chrome accent. also did the third brake light red to make everything uniform:
http://s1.postimg.org/6kn95h9v/IMG_7299.jpg
Im going to be getting mine done with film,
I got my windows tinted to %20,
Ill be going with film on the tails also.
http://shadesofgraytint.reachlocal.net/
here is a gallery of that shop that I will be going to, gallery of their work for heads/tails/fogs/signals
http://shadesofgraytint.reachlocal.net/gallery.html
http://proboards.reachlocal.net/thre...-light-tinting
http://images.tapatalk-cdn.com/15/11...b17f94e95b.jpg
I used VHT- Nite shade. Never questioned about it while getting pulled over. 1+ no problems
Sent from my SM-N900P using Tapatalk