dont bother getting any chip, do a 5 spd swap, and then turbo it or supercharger... thats bout all u can do to ur G
Printable View
Use the search feature, navigate the forum, you can take a 00-05 eclipse manual trans and swap it to your G search for that on the forum, swap a EVO head or Sonata head to make it DOHC, or swap a evo motor with stock turbo, all this mods are going to cost you but to understand them you need read more,so SEARCH, DO YOUR HOMEWORK and and you'll know.
clean the maf sensor.
oh and has anyone ever heard of "port-match"??? where you bore out the manifolds ports to the size of the gasket's openings with a grinder. ive heard of it done but never seen it or heard of a galant owner doing it.
i made one of those with a car fan blower. i didnt have switch on the inside so when i needed the turbo power, i touch the heavy gauge wires inside and i get fireworks all the time. that was with my mirage.
Dont even bother looking at these...they do absolutely nothing for you car. Chips do not work for Mitsubishis but make the computer and your RPMS go heywire.
You sound like you really want HP like right now within min, Im sorry its just not going to work with anycar unless you get a car that already comes with good HP or a turbo. Do research...save your money and look into a DOCH head swap/w Evo turbo...or stock 4g64 motor with turbo....or complete Evo swap. You can also look into picking up your trottle response by swaping intake manifold with 03 outlander manifold...you have to search. Come back when you know what you want.
so no one has ever heard of "port-matching"?
so umm.. anyone done an ecu reflash for the 8g?
if not i'll have to talk to the guy who cracked the 9g
:lol: you guys are horrible.
Driving downhill, piggyback rockets??? :lol:
to the original poster: seriously, use the search button. some mods are Intake/Exhaust/Headers, Outlander Intake Manifold, Ecuflash. Others are Manual tranny swap, 14b/16G turbocharger, Evo/Hyundai Head.
search and you will
[QUOTE=IVORY_G;570733]A VR-4 Spoiler, a JDM converison, rockets, neon lights, a VTEC decal, and Vin Diesel.
LMAO!!!!
Good god man... grinder?????? I ported and polished the head on my 7g with a dremel at LOW speed. Aluminum doesnt like to be cut fast at all. With a die grinder youll go through the head in like 4 seconds.... The intake manifold is port matched as well. doing a 5 speed swap, head work, balance shaft removal and a bigger throttle body shaved 2 whole seconds off of my 1/8 mile time and that was without any exhaust work done.