My running lights are right, but i believe i used a tut off of Prophet's site. My inners arent brake lights.
Printable View
My running lights are right, but i believe i used a tut off of Prophet's site. My inners arent brake lights.
i bought the car with these tails on it but my reverse lights are not working all others work, could this b bad wiring?
^pretty much, but if you don't know where to start on the 2nd gen, look at the bulbs, those will tell you what they do, aka 2 filiment, brake and running lights, one filiment brake or running lights.
@skyforger: pm trigg, he can get you a set.
i checked my bulbs they are good, tried checking to see if i got current going with a multimeter but none is going to the reverse. mine are like pluug and play i dont see any soldering or cable works on the plug.i just see a plug connected to another plug just as if it was stock. iil take a pic later
take the reverse lights out, with power off, meter on the ohms setting, its the omega symbol on the meter. if you get O.L., they aren't even connected, if you have an extremely low reading, like 50 to 125 ohms, something low like that, then you have a short, and you need to find where. I would first check where they are soldered together.