Yes. In deed. Im planning to do mine. With a quick release plug on firewall. If u havent dont urs will talk. So make another one.
Sent from my SM-N920T using Tapatalk
Printable View
So finally got around to working on the car. Swapped the ecu and it made no difference.
Yesterday my friend Matt came over to help me clean up the harness and replace any shady looking connections and it finally idles, runs, and drives.
Here's before:
http://uploads.tapatalk-cdn.com/2016...d295d14699.jpg
http://uploads.tapatalk-cdn.com/2016...3ecb9847bb.jpg
http://uploads.tapatalk-cdn.com/2016...3c4d0873e4.jpg
Here's after:
http://uploads.tapatalk-cdn.com/2016...7e0b7e0b90.jpg
http://uploads.tapatalk-cdn.com/2016...99d5e9c12f.jpg
http://uploads.tapatalk-cdn.com/2016...29b960360d.jpg
Now just need some wrap around wire sleeving and it should look so much better.
Relocated the ecu for better and easier access. Need to make a mounting plate to keep it sturdy from vibrating or moving around.
Need to fix the fan, welded the brackets to the old radiator so I need to cut and reweld them again. And I need to install a coolant overflow bottle.
Sent from my LG-H830 using Tapatalk
Glad you got it running right!
Been a while since I updated this. Didn't get very far but we're getting somewhere.
After the harness cleanup we did. We had an issue with the front oxygen sensor not logging. Found out after some inspection that the wires at the pigtail were stripped
http://uploads.tapatalk-cdn.com/2016...72691e4bd7.jpg
Got that replaced and then we were good to go. Tuner had been busy and been kinda ignoring me, that's what happens when you overbooked yourself. I also think he got bored with my car never wanting to run properly. Long story short I moved on to another tuner.
New tuner who shall remain unnamed for now until I ask him if I can disclose who he is. Had some trouble with my idle. The afr was being really stupid either running rich or lean and can't get it to hit that sweet spot easily. After few tunes and different adjustment we got it to a good spot.
At this point I decided to either send those injectors out for a cleaning or just buy new ones and try that.
Got a major hook up on ID1000, paid $385 shipped instead of $480. Ordered then Thursday morning, got them Friday afternoon. I ordered PnP adapters for them but those are still on the way. Came with connectors and pins so I salvaged a set of adapters I had for the subaru injectors and made adapters for these.
http://uploads.tapatalk-cdn.com/2016...d39ae18c0c.jpg
http://uploads.tapatalk-cdn.com/2016...3849b1658b.jpg
http://uploads.tapatalk-cdn.com/2016...a81e135b7d.jpg
http://uploads.tapatalk-cdn.com/2016...ef79896d61.jpg
And installed them Saturday evening and fired it up on a base map
http://uploads.tapatalk-cdn.com/2016...02b1e0188e.jpg
The Afr is so much more stable. Fic are great injectors but seems that ID injectors are more stable. Although the base map was a bit on the rich side, it was only fluctuating between 11.8-12.3 now that's very impressive. Tuner said the idle log looked really good and the car sounded so much smoother.
More tuning to come soon and hopefully I can turn up the boost.
Sent from my LG-H830 using Tapatalk
Did some tuning last night. About an hour and a half worth probably and nailed down the idle Afr to the 14s range with a slight swing. Drove the car and it drives like my daily almost without boost and we haven't even worked on cruise Afr yet.
Here's an idle shot
http://uploads.tapatalk-cdn.com/2016...23a6819904.jpg
Sent from my LG-H830 using Tapatalk
PS don't mind the oil pressure gauge. Need to replace that.
Sent from my LG-H830 using Tapatalk
Awesome. Glad is running better. I guess i will consider those injectors too. Since is doin better for u. Video soon. Tht spool. Lol
Sent from my SM-N920T using Tapatalk
Noted!
Sent from my SM-N920T using Tapatalk
You are not planning on using e85 are you? I ask that cause 1000cc injectors max out at around 400whp on e85.
Installed the new wheels. Avid.1 Av20 18x8.5 +15 wrapped in Nankang 225/40-18 with 10mm spacers on the front to clear the brembos.
Here's pics before adding negative camber to the front
http://uploads.tapatalk-cdn.com/2016...dcee2044a1.jpg
http://uploads.tapatalk-cdn.com/2016...693fe2960a.jpg
http://uploads.tapatalk-cdn.com/2016...981d113206.jpg
Here's a picture after maxing out the camber plates on the coilovers
http://uploads.tapatalk-cdn.com/2016...05dd9ff66c.jpg
http://uploads.tapatalk-cdn.com/2016...cfcddca61f.jpg
http://uploads.tapatalk-cdn.com/2016...ce7e230b21.jpg
http://uploads.tapatalk-cdn.com/2016...27893a86b6.jpg
Got Ingalls camber kit and ebay camber kit for both cars to add some positive camber on the rear
http://uploads.tapatalk-cdn.com/2016...cedfcf8289.jpg
http://uploads.tapatalk-cdn.com/2016...849983e28d.jpg
Went with evo series prosport gauges
http://uploads.tapatalk-cdn.com/2016...6c0de84070.jpg
Boost gauge was acting up. Prosport said they won't replace it, but they want me to send it in and get it tested. So I decided to pull the trigger on Aem gauges instead
http://uploads.tapatalk-cdn.com/2016...f4fc7dfbfd.jpg
http://uploads.tapatalk-cdn.com/2016...6048b75dd8.jpg
http://uploads.tapatalk-cdn.com/2016...87793c43b9.jpg
http://uploads.tapatalk-cdn.com/2016...4649f6d7a0.jpg
Sent from my LG-H830 using Tapatalk
looking good bro. Love the aem gauges
That's one nice looking project. Keep up the good work!
Too fly! Proper work. Like the ac vent delete. 😆
Sent from my SM-N920T using Tapatalk
those rims are straight legit what size are they?