LEDs in gauge cluster.

Can we see more before and after pics of the LED upgrades you've done? I'm thinking about doing the blue on the cluster and ignition ring (that could change...) but at this point I'm more concerned about getting the right amount in the right size. Where's the best source for both the internal (cluster/ door/ HVAC...) and the running/ brake LED lights? If I'm going to do it, I might as well do it all! One site had them for $5.95 US each, so if anyone has found a site that has them for less then speak up.


Thanks!

I get mine off eBay. I've had pretty good luck with eBay. As for the amounts and sizes for the cluster it's already in an earlier post. If your a 7g then look for the bulb list for all the bulb sizes. I can try to get some updated pics but the only before and after pics are the ones that are already in this thread. I now have 32 smd panels in both dome lights (see sig)and the trunk.

98mgalant likes leds :p

I sure do man but I'm no expert.lol I actualy had a better idea for the guage cluster LEDs. The interior LEDs that I bought come with different hook ups and they will work in the gauges. It would only take 2 in sure and it'd be supper simple. I'll post a link for them latter.

Quote:

---

Originally Posted by 98mgalant

I sure do man but I'm no expert.lol I actualy had a better idea for the guage cluster LEDs. The interior LEDs that I bought come with different hook ups and they will work in the gauges. It would only take 2 in sure and it'd be supper simple. I'll post a link for them latter.

---

98m,


Thanks dude! I'll be looking for the info you provide. I did see the other posts and there is a lot of info there with differing opinions. How much were they on e-bay?

I think I got mine for around $10-$15 for all the gauge cluster LEDs. You just have to look for them on eBay. Prices are always different I found mine on sale.

Here's the link for the ones I used for the interior. http://cgi.ebay.com/ebaymotors/Light...#ht_3718wt_948

I think they are bright enough that if you bought 2 they would light up the gauge cluster. One for each side. Now I don't know for sure but if it did work that would be cheaper. It would require you to take the gauges out completely inorder to mount them inside.

i just trim the T10 socket,and it fits the T6.5 casing..
http://i469.photobucket.com/albums/r...512_140424.jpg
my E55 meter a bit difference from yours,it needs 2 xT10 and 5 x T6.5 to light up whole meter instrument.
http://i469.photobucket.com/albums/r...514_091930.jpg

I never even thought about trimming them. That would have made more sence.lol nice work.


Post pics of completed product.

Quote:

---

Originally Posted by 98mgalant

I never even thought about trimming them. That would have made more sence.lol nice work.


Post pics of completed product.

---

i still need 3pcs t10 to complete the meter instrument,:smile:
right now i only have 4pcs t10 to the meter.
i just change T10 smd to the shifter ,do you have any idea how to change the a/t mode button bulb ?
http://i469.photobucket.com/albums/r...516_194617.jpg

What button is that? I may not have it. Have you tried the gauges with the four lights in? They are pretty bright so you may be able to get away with it.

Quote:

---

Originally Posted by 98mgalant

What button is that? I may not have it. Have you tried the gauges with the four lights in? They are pretty bright so you may be able to get away with it.

---

the "A/T mode" on the shifter,i manage to take it out today,but the problem is ,the bulb is too small,where to find smd that small like it?
perhaps T3, T4.2 or T4.7? :022:
i just order extra T10 5 smd from ebay,will post the picture once i complete.:orangebiggrin:
http://i469.photobucket.com/albums/r...5-17104920.jpg
http://i469.photobucket.com/albums/r...5-17105041.jpg
http://i469.photobucket.com/albums/r...5-17105222.jpg
http://i469.photobucket.com/albums/r...5-17105654.jpg

what is that boton for?

What he said^^^

I have never seen that, apperantly we donthave it on usdm Galants. But someone said that you can get this bulbs at radio shack. Not led though and I've never seen them. The only way that I know of would be to try and make one.

Quote:

---

Originally Posted by 98mgalant

What he said^^^

I have never seen that, apperantly we donthave it on usdm Galants. But someone said that you can get this bulbs at radio shack. Not led though and I've never seen them. The only way that I know of would be to try and make one.

---

found the smd,is T3.:023:
http://cgi.ebay.com/3BSpec-T3-LED-Bu...item27b80dee38

Dude that's bad ass. You have earned the title of my favorite noob.lol Although I don't have any money to buy these I will have them eventually. :)

Anyway what's that button do?

Quote:

---

Originally Posted by 98mgalant

Dude that's bad ass. You have earned the title of my favorite noob.lol Although I don't have any money to buy these I will have them eventually. :)

Anyway what's that button do?

---

Quote:

---

Originally Posted by raks_22

what is that boton for?

---

i just lazy to typing,here's the picture that explain the button..:025:
someone said is useful to prevent skidding on snow
http://i469.photobucket.com/albums/r...5-18101250.jpg

5 pcs 5smd on the two large gauge,but the lights 200km-220km display on gauge display is very dim.. :no:

hoo, nice, i never have seen a galant whit that boton

After looking at my cluster and yours it looks like I have a light where you are geting the dark spot and you dont. You could conect a light to the working light with some wire and glue it into place or something. And ya I have never seen that button in my life.lol