intake project underway (no more fan)

i got rid of the fan under the hood and im in the process of working on a dry ice intake. the following pictures are of the skeleton for the intake box. ive noticed there is a small gap between the headlight and bumper so that is where the air will come from. i have a filter lying around in the garage so im going to cut that up and use it on eather side of the box (there there is open spaces in the pictures) a locking latch on top with hindges, like a door. to keep it held down im going to use the screw holes that held the stock intake box. im also working on a way to use regular ice when dry ice is not available.
http://i2.photobucket.com/albums/y34...3/100_0316.jpg
http://i2.photobucket.com/albums/y34...3/100_0312.jpg

god bless you

<div class='quotetop'>QUOTE</div><div class='quotemain'>the fowling pictures </div>
i dont see any birds??

ass

wouldnt regular ice freeze up mighty quickly

you mean melt?

that too hahah

is that a neon zip tied under ure engine???? where ure fan was?? :?

<div class='quotetop'>QUOTE(Censee)</div><div class='quotemain'>is that a neon zip tied under ure engine???? where ure fan was?? :?</div>
:roll: http://i2.photobucket.com/albums/y34/KRISP...03/000_0049.jpg

its a bad idea. it creates condensation on the inside of the intake, which runs the risk of hydrolock. it will barely improve perfomance and will fuck with your air fuel ratios. get an aem or injen short ram and call it a god damn day.

<div class='quotetop'>QUOTE(krispy03)</div><div class='quotemain'><div class='quotetop'>QUOTE(Censee)</div><div class='quotemain'>is that a neon zip tied under ure engine???? where ure fan was?? :?</div>
:roll: http://i2.photobucket.com/albums/y34/KRISP...03/000_0049.jpg</div>


dont ever :roll: me, ,,,,,,,i was right,,, u do have a neon where u have ure fan.....i dont see why the link was posted as if to correct me ...

hey man dont be a dick, neons zip tied to the engine compartment are ill shit.


so ill, it makes me sick.

<div class='quotetop'>QUOTE(01GalantLSV6)</div><div class='quotemain'>hey man dont be a dick, neons zip tied to the engine compartment are ill shit.


so ill, it makes me sick.</div>

fine fine,, i apologize.....i feel so bad now :oops: :oops: :oops: :oops:

buy my short ram injen intake for 140 bucks and your good!

if you're going to use dry ice, make sure your box is sealed away from the intake, as co2 is not combustible and will slow you down, and make sure the box has a way to vent excess pressure or it may go boom. it should vent the pressure to somewhere away from the intake to prevent power loss from the injestion of the co2.

condensation will most likely not be enough water to hydrolock a motor, unless maybe it is .00001 liters (the engine size, that is).

Quote:

---

Originally Posted by Censee

dont ever :roll: me...

---

LMAO https://www.thegalantcenter.org/styl...ault/laugh.gif

Quote:

---

Originally Posted by sabzi5858

if you're going to use dry ice, make sure your box is sealed away from the intake, as co2 is not combustible and will slow you down, and make sure the box has a way to vent excess pressure or it may go boom. it should vent the pressure to somewhere away from the intake to prevent power loss from the injestion of the co2.

condensation will most likely not be enough water to hydrolock a motor, unless maybe it is .00001 liters (the engine size, that is).

---

i was told someone did this to an eclipse and a blow off valve was needed to relive pressure when not in motion. since this has been done ill look for it on the DSM forum and compair notes.

a blow off valve isn't the design you want. you want something like a radiator cap that will hold the pressure up to a certain amount, and relieve everything beyond that, routing it to the wheel well or something.

huh i hadent thought about the wheel well, thanks

https://www.thegalantcenter.org/viewt...ghlight=dry+ice

i have a much better idea for an intake

http://www.storm.ca/~seanmatt/mx3gsr/14b-1.JPG

page cannot be displayed

Quote:

---

Originally Posted by peanotation

i have a much better idea for an intake

---

.....

IT WAS A PICTURE OF A TURBO OK

Quote:

---

Originally Posted by 01GalantLSV6

hey man dont be a dick, neons zip tied to the engine compartment are ill shit.


so ill, it makes me sick.

---

my front neon is zip tied behind my grille
does that make you sick, too ?
http://img14.imgspot.com/u/05/84/20/1.jpg
http://img14.imgspot.com/u/05/84/20/2.jpg
http://img14.imgspot.com/u/05/84/20/3.jpg
http://memimage.cardomain.net/member...99_11_full.jpg

Quote:

---

Originally Posted by mrjaydeeone

Quote:

---

Originally Posted by 01GalantLSV6

hey man dont be a dick, neons zip tied to the engine compartment are ill shit.


so ill, it makes me sick.

---

my front neon is zip tied behind my grille
does that make you sick, too ?

---

makes me sick.. all neons do, including the dodge neon https://www.thegalantcenter.org/styl...ult/tongue.gif

Quote:

---

Originally Posted by peanotation

IT WAS A PICTURE OF A TURBO OK

---

all caps equal ban! https://www.thegalantcenter.org/styl...ult/tongue.gif

Quote:

---

my front neon is zip tied behind my grille
does that make you sick, too ?

---

yes.

Quote:

---

Originally Posted by 01GalantLSV6

Quote:

---

my front neon is zip tied behind my grille
does that make you sick, too ?

---

yes.

---

My oil cooler is zip tied in place. I guess Im a sicko too. BUT I LOVE TEH ZIPTIES!

Quote:

---

My oil cooler is zip tied in place. I guess Im a sicko too. BUT I LOVE TEH ZIPTIES!

---

now you see, thats a commendable usage for a zip tie. you have an oil cooler because of the need for your oil to be cool to prevent the risk of something breaking because your turboed.

but neons suck when installed properly, let alone hanging by a ziptie.

what, should i drill into my raidaitor?

Quote:

---

what, should i drill into my raidaitor?

---

no, you should take that neon out and burn it. what are you illuminating? your sub par engine bay that houses a weak 4 cylinder motor? and if your looking for style points, im pretty sure the zipties will negate any points youll get with the neon itself.

Quote:

---

Originally Posted by krispy03

what, should i drill into my raidaitor?

---

At least then you could be somewhat cool and show us your melted engine. :?

Quote:

---

Originally Posted by 01GalantLSV6

Quote:

---

what, should i drill into my raidaitor?

---

no, you should take that neon out and burn it. what are you illuminating? your sub par engine bay that houses a weak 4 cylinder motor? and if your looking for style points, im pretty sure the zipties will negate any points youll get with the neon itself.

---

ill take them off only to shove them up your ass.

then u will have brown neons

if hes sick, green

maybe clay colored...

I'll buy some Ice candies from you when you're done Chris https://www.thegalantcenter.org/styl...ault/laugh.gif

Quote:

---

Originally Posted by seth98esT

Quote:

---

Originally Posted by 01GalantLSV6

Quote:

---

my front neon is zip tied behind my grille
does that make you sick, too ?

---

yes.

---

My oil cooler is zip tied in place. I guess Im a sicko too. BUT I LOVE TEH ZIPTIES!

---

where did you ziptie it? mines is bolted right in front of the wheel well. all my vacuum lines are zip-tied though

there is an unused flange spot welded in place vertically in the bumper cavity in front of the drivers fender well. its kind of at an angle, so i made a triangular bracket to mount my oil cooler square.
its rather convienient because the flange has a bunch of holes in it already. i zip tied all my boost lines too, except ones big enough to clamp.
i'm thinking about molding a fiberglass duct to channel air from the stock bumper inlet through the oil cooler.