I tapped mine by cutting the rubber fuel line that runs from the filter to the rail. I just bought a BRASS T, spliced it in, a couple feet of rubber fuel line to go to the solenoid and 4 hose clamps. No probs. Took about 5 minutes.
all i need to finish the install is to tap the fuel....pls response asap!!!
I tapped mine by cutting the rubber fuel line that runs from the filter to the rail. I just bought a BRASS T, spliced it in, a couple feet of rubber fuel line to go to the solenoid and 4 hose clamps. No probs. Took about 5 minutes.
thanks you guys i got everything mounted now im ready to start the wiring and fuel tapping
oh for sure nick i cant wait to see it myself.... lol
oh yah guys how do you hook up the throttle position switch it explains it in the instructions but i not all that sure i understand it so if you could explain more thanks?
Hey Man... When I had the Gas on my car, I took off my fuel rail, drilled a hole in the end and then I threaded it. Next I screwed a Nipple there and ran a braided fuel line up to my firewall where my Fuel Solenoid was mounted. It worked great. If you ever take it off you can just buy a cap for it or buy a fuel pressure gauge and put it there.
Have fun!!!!
Brian
Bookmarks