Not sure about fitment... But I don't believe you can use a crash beam with that bumper most kits/jdm bumpers don't allow enough room for it...
Iam sure a few with de bumpers will chime in
off topic: Where you get it at ?
can anyone help or guide me how to install these n how to actually make the crash bumper
Not sure about fitment... But I don't believe you can use a crash beam with that bumper most kits/jdm bumpers don't allow enough room for it...
Iam sure a few with de bumpers will chime in
off topic: Where you get it at ?
---||| 97Galant, E3 16G, Safc, 5spd,Drifter Body |||---
they are the original foglights for the bump
that bracket goes on the back of the bumper and has all the mounting points on it for the fogs and the 2 bolts by the head lights. i sent you how to do the swap man its very simple.
not that i look at it i only got the sides of the bracket. mine is a full metal bracket in the center too so i have a crash bar. still the 2 pieces bolt onto the bumper cover then you remove the old bumper like i told you and then put this one in. and move the horn if need be
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
these pics should help/ and ull c how mine was all 1 piece
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
thx alot
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Bookmarks