Down pipe angles

[mrg7243]

Does anyone by chance know the angles for the down pipe on a cali-spec car?? Mine is rusted, the cat is clogged and its leaking, so i am just going to get mandrel bends, a high flow cat and build it myself. If anyone could get me the angles of the pipes please let me know.

[Stewi]

Something like that you just build it on the car. Honestly, you might spend more doing all that versus just having a muffler shop do it for you. They may charge you like $150 to do it, you can save yourself the trouble of buying metal, then having to cut it, weld it, then if it doesnt fit, re-shaping and re-welding.

[mrg7243]

I understand where you are coming from. But i would rather do it myself. To Me its a pride thing saying i did that. I built it,everything done on the car was done by Me, that i can do. I feel i can enjoy the car more when i do it myself,than somone else.

Sent from my PD_Novel using Tapatalk

[Stewi]

I understand where you are coming from. But i would rather do it myself. To Me its a pride thing saying i did that. I built it,everything done on the car was done by Me, that i can do. I feel i can enjoy the car more when i do it myself,than somone else.

Sent from my PD_Novel using Tapatalk

Ok fair enough. Your best bet is to remove the damaged one from the car and build the new one to match it. The other thing you can do is just buy a replacement and install it yourself. Im not sure if your looking for fabrication type pride or just want to do the install yourself. You can order a cat and tubing from Jegs or summit for fair prices if your still looking to fab it yourself.