Fog in the fog lights :D

[Rabbi1991]

What is the easiest and cheapest way to remove the fog from my fog lights?
I have fog and don't want to drill in the cover or ballast. I want a cheap and easy way to remove it so it will all be sealed and nice afterwards.

[01blackG]

Depends on what kind of fogging you have. Water on the inside or plastic fogging up on the outside?

[Rabbi1991]

Water on the inside

[oakrdrs187]

You would have to make sure the it is completely sealed all the way around.

[Joshua42007]

Moisture tends to build up, but how much moisture are you getting is the question?

headlights arent 100% sealed, they have small openings that relieve some of this moisture. do you have any pics?

[01blackG]

Ok a way to fix.
First I would probably remove the hole unit from the car..... lens and back plastic part which the lens connects to.
Then take a hair blower to it to dry up any water inside.
then get silicone and beed it around where the lens connects up to the black plastic.
At that point you should be good to reinstall and be on your way for sometime.

Unless you have a crack or hole else where.

[finald8ta]

just remove the fog light assy and let it sit in the sun for an hr then put a bead of silicon around the lens, or if u have an air compressor blow it with air