It's a one piece and only the 4 smaller bolts come off to replace it.
The belt that drives the power steering and A/C came apart on my 2000 2.4L. This afternoon I went to replace it, got it on and it promptly blew it off when I started the car. I put it back on and the same thing happened.
I found that the balancer/pulley on the crank has a piece missing out of it:
What's involved in replacing this? Does that big bolt in the middle have to come off or just the 4 small bolts around it? And is it one piece where there's the groove for the alternator belt as well or two pieces where this is just for the power steering/AC belt?
It's a one piece and only the 4 smaller bolts come off to replace it.
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
Yeah it was just those 4 bolts and took some persuading with a mallet.
I was able to move the outer pulley by hand while it was still on the engine and the rubber part was coming apart. I guess it was a good time to replace it.
Bookmarks