-
new crank!!!!
Hey guys I was going through my favorites (I'm really bored), here's what I found: A website/company sells a stroker kit for 4g63...from what I've heard, all it is is a 4g64 crank with different rods. The crank that they sell is knife-edged, thus allowing you to rev faster, accelerate faster, etc. Sooo...if the crank is in fact from our motor, we can that crank and install it into the 4g64.
This is good for all of you guys that are going all-motor, or even 4g64t
almost forgot the website http://www.ffwdconnection.com/engine.htm
-
Actually, I think the rods are essentially the same (they may be of better quality to go with the kit, but the '64 and '63 use the same rods. Just the crank itself is diffrent). Apparantly, all 4gXX motors share the same basic bottom end, just the crank and pistons are diffrent to change displacement and compression ratios. Also, isn't the '64 crank knife edged from the factory?
Posting Rules
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks