<div class='quotetop'>QUOTE(DOHCstunr)</div><div class='quotemain'>well you might want to remove the clip that holds the brake line to the knuckle. if you detatch that you can move the knuckle further away.
also,
i always use a hammer and a socket extention to tap the axle splines through the hub
just hold the socket extention(or screwdriver) against the axle, then hit the screwdriver/extention with the hammer(this way you don't risk damaging the axle threads w/ the hammer
just tap tap tap until the axle comes free.
you usually have to put a lot of english on that knuckel to get the axle to clear</div>
Well see I can get the axle out of the hub by using a ratchet ext. and a hammer. Where my problem is I cant get the axle all the way out so it will come free. (See pic above da's first post)
Edit:
Ok I finally removed the driverside axle. The way it came off was so gay though. I have been trying to remove the damn thing since about 6 or 7 o'clock yesterday. Today itwas the same thing , I couldnt move it. But on one random pull it just came out. I wasnt even trying hard and it just came right out. Right now Im happy and pissed at the same time because all that time I spent trying to get it out and couldnt, and today how it just came out so easily :?
And now cant get the pass out.
Bookmarks