If I'm not mistaken the blue wire goes to a switched (ignition on) 12 volt source. This is so you don't leave the head unit on without the ignition being hot.Originally Posted by SLS2000
I got everything ready to install a Kenwood.
I ordered the (Mitah / Wire harness) package but it came with out instructions. I know how to hook up the wire harness but Im a little confussed as to what am I suppose to hook up the blue wire from the mitah to.
http://www.autotoys.com/x/catalog/MITSUBIS...ESS_p_1379.html
thanks in advance
8G 4 life!
Mods: CAI,Grounding wires, CCorners, Shaved, 3G STB. AGX/Teins, Addco bar, OZ F1 wheels And well maintained : )
If I'm not mistaken the blue wire goes to a switched (ignition on) 12 volt source. This is so you don't leave the head unit on without the ignition being hot.Originally Posted by SLS2000
Chip
2000 Basalt Black Metallic GTZ
(Paint Code: Porsche LC9Z)
Genuine experience carries a lot more credibility than the ability to answer a question.
Originally Posted by Fishboy55
which is pretty much the blue wire coming out of the radio which can be used for a power antenna or aftermarket amplifier???
( if this is the case than thats what I thought but Im just trying to make sure so as to not damage the factory amp)
8G 4 life!
Mods: CAI,Grounding wires, CCorners, Shaved, 3G STB. AGX/Teins, Addco bar, OZ F1 wheels And well maintained : )
You're right but for the wrong reason. The blue wire from the mitah is the amp turn on wire. That will get hooked up to the blue/white wire from the kenwood radio.Originally Posted by Fishboy55
MECP First Class Certi-fried installer.
For the right price, nothing is impossible.
Originally Posted by cntrylvr79
Thank you!!!
close thread and pin it! :laughing: :laughing: :laughing:
8G 4 life!
Mods: CAI,Grounding wires, CCorners, Shaved, 3G STB. AGX/Teins, Addco bar, OZ F1 wheels And well maintained : )
Bookmarks