anti-lock issues

[speedracer]

well i have an i4 and it had the drums in the back.................

so i wanted to get rims but didn't want to be like freaking lame and have rims and the lame ass drums in the back, so i swaped on the disc brakes, which i purchased from a member here......

but the problem was the speed sensor cables were cut so instead of u know getting new ones i just spliced them in......, but anfter like ten minutes my anti-lock[b] light came on....so i consulted my haynes manual and it said to specifically not mess with the wires for the sensors and if they are frayed or cut to get new ones.......

i just ent and got new ones and istalled them today i unhooked the battery to reset the car and istalled them but when i went back and started the car when i as finished the light was still on so i'm at a dilema here.....

if any one coulds trow me a hint as what may be the problem i would be extremely grateful............

[bronxbombr]

Did you bleed the brakes properly?
Install the new sensors correctly?

[Fishboy55]

Did you bleed the brakes properly?
Install the new sensors correctly?

Assuming you answered yes to the above questions, pull the relay for the ABS/Traction control, diconnect the battery for about 30 mins and reinstall the relay. That should clear the light. If not, post back. We have the Mitsu manual for the sensors and can post relevant pages.

Also do a search. Several ppl here have done the drum/disc conversion and may have posted some advice.

[speedracer]

thanx guys i will try this and let u know if it works

[bronxbombr]

also make sure that the sensor is intact and not busted.