I bought a set of JDM tail lights from ebay and I didnt ask if they come in with any plugs for the light socket and now I dont know what I have to do or buy when I bring the car in so they can put the ligts in..Can some1 tell me where I can get the plugs/socket and are they the same light # for the brake or rev. lights
00 Galant ES Turbo/5-Speed
13 GTR
^ That link is helpful if you actually have sockets and bulbs, since it just addresses the wire order. I know someone posted a link once upon a time to a 5 or 7 page site that some guy made, showing exactly what he had to use and modify to get his JDM tails to work, but I haven't been able to find it since. There is also a link to the galantforums where I think DryBear (?) did a quick one page run down.
Is it possible to get sockets that fit in the tails without modification? I don't mind splicing the wires but I was just curious if there was some sockets with wires attached already that I could buy and make my own harness without cutting the taillight housing. I took one of my 3rd Gen tails to autozone to see if they had something that would fit, but of course they said they didn't.
link to drybear's tut on GF
http://www.galantforums.com/modules....showpage&pid=9
If you post stupid and incorrect information, you will get red nuggets.
Bookmarks