cutting cyber2 front bumper?

[dknight3]

has anyone cut those things off the cyber2 front bumper that stick up and go where your grille is supposed to go?

cause i want the cyber2 bumper, but i also want a grille.

if i cut them off and then fiberglassed the gaps would i be able to use jdm heads and grille and not have any fitment issues?

[mrjaydeeone]

I have the cyber 2 kit and JDM headlights. The headlights acutually hold the bumper to the car with those 2 parts that stick up. I know there is a member on here with a shogun front bumper, and he took a stock 99-01 grille and just trimmed it at angles on either side and wedged it in to the opening. Also there is the USDM version of the cyber 2 bumper which you still use the stock 99-01 grille like this

[dknight3]

do you know where i can get that from?

[mattalicslvr8g02]

here you go .. with this bumper you use stock headlights and 99-01 grille

http://www.extremedimensions.com/4957.html

[dknight3]

i wonder how much gap there would be with jdm heads and grille..

[mattalicslvr8g02]

there is only a gap with the jdm molded bumper (with the points) if you use the u.s headlights

[dknight3]

oh there is no gap with jdm headlights and us bumper?
sombody told me there was...

[komodo]

there is only a gap with the jdm molded bumper (with the points) if you use the u.s headlights

He just stated that there is a gap while using USDM headlights with the JDM bumper...
Uh some site, I forgot which, even suggested you get the JDM headlights for the JDM bumper. This is most likely for no gaps and it'll lay flush. Just my assumption though.