The Galant Center - Powered by vBulletin

Thread: AMSS headers...I think

Showing results 1 to 15 of 15
  1. #1
    SuperchargedGTZ
    Guest

    AMSS headers...I think

    last night all of sudden i started getting this really LOUD noise from under neath the car. it sounds like an exhaust leak from the headers, but i am gonna have to check it out tommorow. Ross from RIPP said that these headers like to expand on the joints and eventually come loose and they leak. has anyone else had this problem yet?

  2. #2
    Official TGC Pop-Pop Fishboy55's Avatar
    Join Date
    07-31-2002
    Location
    Baltimore, MD
    Posts
    2,848
    Not yet, and I've had headers longer than anyone on the board. But then again I'm not running boost. RPW headers are mild steel, so they expand and contract pretty well. So far (knock on wood) no problems.

    Chip
    Chip

    2000 Basalt Black Metallic GTZ
    (Paint Code: Porsche LC9Z)

    Genuine experience carries a lot more credibility than the ability to answer a question.


  3. #3
    SuperchargedGTZ
    Guest
    well i found the leak. those gaskets are a piece of shit. the gasket from the front 3 collectors to the Y connector. i seperated the 2 and found the gasket in half. So what can i do now? where the hell can i get a gasket that will be compatible with the headers?

    is no gasket better than half a gasket until a get a new one?

  4. #4
    D03GTZ
    Guest
    Well anything is better than nothing. How about Fel-Pro? They make top quality gaskets for almost every other car. Try asking them. They might need to know some dimensions but I would like to know also.

  5. #5
    try an auto parts store or an exhaust shop. they should have the gasket u are looking for...

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

  6. #6
    SuperchargedGTZ
    Guest
    thanks peps....i am gonna try Pep boys or something, than midas or meineke. i have half the gasket, but anything will be better than nothing like you said. i need something though because without the gasket the collectors dont even come close to fitting the Y. i will let you all know when i find out tommorow.

    i am just glad i found the problem and it wasnt something serious.

  7. #7
    BlankMan
    Guest
    There's also hi-temp 'gasket maker'. It's a compound that comes in a tube - you lay it out on the parts to be gasketized, let it setup, put em back together and voila. I know it works well for hi-temp exahuast applications - I used it in my olde 90 Prelude at the exhuast port/headers joint.

    J

  8. #8
    D03GTZ
    Guest
    No, I would definitely not use that on exhaust, especially not for header gasket! we use that all the time for intake manifolds, oil pans, trans pans(sometimes) and things like that. You could try it but when you do get the gasket from wherever you will have a hard time removing the silicone gasket. Just my 2 cents

  9. #9
    SuperchargedGTZ
    Guest
    thanks guys....i got the gasket and the other stuff just in case.

    FYI....just an standard header (collector) gasket 2.5", got it from Pep Boys. Brand is Mr. Gasket.

  10. #10
    D03GTZ
    Guest
    That should be fine for at least a while. I wouldnt plan on that lasting too much longer than whatever gasket you got with the headers, though. I would still try to find one from Fel-Pro

  11. #11
    SuperchargedGTZ
    Guest
    actually it is exactly the same gasket. I compared. so what does that tell us?

  12. #12
    Official TGC Pop-Pop Fishboy55's Avatar
    Join Date
    07-31-2002
    Location
    Baltimore, MD
    Posts
    2,848
    <div class='quotetop'>QUOTE(GTZ27)</div><div class='quotemain'>actually it is exactly the same gasket. Â*I compared. Â*so what does that tell us?</div>
    Ummmm That Fel-Pro isn't worth the extra cash????

    Chip
    Chip

    2000 Basalt Black Metallic GTZ
    (Paint Code: Porsche LC9Z)

    Genuine experience carries a lot more credibility than the ability to answer a question.


  13. #13
    SuperchargedGTZ
    Guest
    i wasnt being a SNOT i was just trying to say that maybe the AMSS gaskets/headers arent all that great.

    sorry D03GTZ

  14. #14
    Well GTZ27 i know ur situation is different cuz ur gasket cracked but.... being that i'm not a wiz in tuning, however this last sunday morning i was was watching that show on TNN i think Trucks or something....one of the Rodder shows.....anyways. They say that when installing new headers, u would have to let the car run then cool it down then retighten or retourque the screws....u gotta do this a few times he says cuz the gasket obviously expands. But he says by doing this, it will prevent leakage. Just wanted to pass that knowledge i learned in tuning 101
    "....BIG got hit in the passenger seat, 'Pac got hit in the passenger seat, now i'm ridin' 'round in the passenger seat..." 50 Cent

  15. #15
    SuperchargedGTZ
    Guest
    Thanks.....i will retighten tonight.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •