wheel hub bearings

[EVOlved]

im pretty sure i need to change my front wheel bearings. the front end howls and thumps fairly loud and shakes a bit at high speeds. it sounds almost like a scroll saw cutting through wood. if it is the bearings i figure id just change the entire hub assembly while im at it. the car has 90k on it, its a 2000 2.4l. does it sound like the bearings? if so, any one know where i can find the hub assemblies for a fare price? thanx in advance

[EVOlved]

anybody?

[Gladiator]

I think I'm in the same boat. Just waiting it out to make sure thats the problem.

[michalsstwin]

i seem to have the same problem, but in the rear of my car..

[Kalamidad]

first stop should be a auto part store. They may be able to order it for you. Also try Mistubishi-parts.com they have just about everything.

[6G72gearhead]

National (Fel-Pro) makes them, I can find the part # tomorrow.

[QnzMostWanted]

the hubs and the bearings are 1pc, u cant just change out the bearings without changing the hubs

autozone rarely carries them, ebay usually sells them in pairs for a better price

[bronxbombr]

National (Fel-Pro) makes them, I can find the part # tomorrow.

the number is 512235 I have them in stock but they are not cheap.

[EVOlved]

how much is not cheap? i think ebay has them for 99.00 bucks for the pair plus 20 shipping

[bronxbombr]

my bad the actual number is 512236. the 512235 is for the 7G

[6G72gearhead]

Find a National bearing dude, dont go cheap on bearings, many nasty things can be caused by going cheap on them. I've seen almost all of it.

[bronxbombr]

werd, I just did a recall yesterday on like 40 bearings i had to pull to send back to national.
National is the best you can get next to the dealer. Anything cheaper is well.............
Not safe or in your best interest.

Jobber on that is $115.22 so aint no way you getting it for 99 bux unless its not National or maybe its a reboxed item. (reboxed meaning cheap parts in a expensive box)
Like frooty O's in a cheerios box

[Gladiator]

how hard is to change them bearings by yourself?

[EVOlved]

http://www.autopartswarehouse.com/de...MHA590240.html

any word on these??

[bronxbombr]

TImken is good also but not better than National, and what a coincidence you looked that up on one of my jobs websites. We own that one too:)

[EVOlved]

i just need the car to run a for a little over a year or so until i get the evo paid off. then i'll probably start leasing a new car as my dd. any break on the price on that site or is that it? would it help u if i bought them through u or just get them off the site? let me know