Originally Posted by
Stewi
Paint hasnt been done yet.
Craig I actually just got the seats to fit in last night. I havent installed them but I finally got them to the point where they fit. So listen to this..... I had to move the e-brake handle about 3/4" towards the console so that the base of the handle wouldnt be hitting the seat. I had to actually cut the base mount off the handle and cut the pivot shaft and weld up some stuff. With that modification the top shoulder bolster in the seat just barely clears the upper seat belt mount. If I ever have to put a cage in this car, im most likely going to need different seats.
I used 3g eclipse sparco base brackets and sparco specific sliders. Sparco seats use their own specific sliders, they are not the same bolt pattern as any other brand of seat as far as I know. My old brackets for my tenzo's fit Recaro's as well, but werent even close to my Sparco's. Whats weird is my old tenzo base brackets were for the 3g and they fit without mods, but I had to modify the passenger side one from sparco. I tell you, nothing is easy with this car, NOTHING.
Bookmarks