The Galant Center - Powered by vBulletin

Thread: 2nd 5spd swap .....

Page 2 of 2 FirstFirst 12
Showing results 21 to 29 of 29
  1. #21
    Yea as long as i get my plates in time and awaiting one more part for a the swap

    UPDATE-10-14-08

    so time to take the car out the garage it wont go into 2-4-Reverse gears .. cable looks like its not long enough and the cable is starting to break so its back to the drawing board
    Last edited by customgalant99; 10-14-2008 at 10:01 PM
    99 BLACK GTZ
    5 SPD 10-12-08
    TEIN SPRINGS AND KYB SHOCKS
    WTB FRONT BUMPER
    WTB CF HOOD
    WTB GRILL
    WTB CF TRUNK

  2. #22

    i want to do a swap need help

    Hey guys, im reading couple of guys who did a tranny swap from auto to manual. i want to know what tranny could i use and list of all the parts where i can get them. which tranny should i look for and will i have a check engine light problem? guys, if you have time call me in my cell or email me [email protected]

  3. #23
    here is my cell number xxx-xxx-xxxx ram. thanks.
    Last edited by mrjaydeeone; 11-13-2008 at 04:38 AM

  4. #24
    Experienced TGC Member dwjp90's Avatar
    Join Date
    04-13-2008
    Location
    west chicago, il
    Posts
    1,150
    ok first you need to search the threads, there are plenty with all the info you need, and second you shouldn't post your cell phone one a public fourum

  5. #25
    Senior Moderator mrjaydeeone's Avatar
    Join Date
    07-31-2002
    Location
    Woodbridge NJ/Staten Island NY
    Posts
    4,455
    Quote Originally Posted by ralphrider150 View Post
    here is my cell number xxx-xxx-xxxx ram. thanks.
    bud I edited your number out. You shouldn't post it on a public forum. You are just opening yourself up for problems.
    Jason - - cofounder of TGCNY
    click banner to enter the NY Chapter

    2001 Galant ES
    2004 Jeep Grand Cherokee Special Edition

  6. #26
    Quote Originally Posted by customgalant99 View Post
    Yea as long as i get my plates in time and awaiting one more part for a the swap

    UPDATE-10-14-08

    so time to take the car out the garage it wont go into 2-4-Reverse gears .. cable looks like its not long enough and the cable is starting to break so its back to the drawing board

    Ivoery8g had that problem and he remedied it with messing with the cable a little, ask him what he did.
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  7. #27
    my ears rang lol


    before


    after
    The "Tumbler" Is Here
    Stock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs
    3xxWHP/3xxWTQ [Current]

  8. #28
    Experienced TGC Member DryBear's Avatar
    Join Date
    11-05-2003
    Location
    San Francisco Bay Area
    Posts
    1,517
    Another thing to look at is the shifter cable bushings - if they are worn, it will contribute to difficulty in shifting. I had the same problem of going into the lower set of gears (2-4-R) and a new shifter bushings fixed it.

  9. #29
    In the end i just needed to replace the cable completely thanks for the input tho next to get lsd change wheel bearings and off to supercharger
    99 BLACK GTZ
    5 SPD 10-12-08
    TEIN SPRINGS AND KYB SHOCKS
    WTB FRONT BUMPER
    WTB CF HOOD
    WTB GRILL
    WTB CF TRUNK

Page 2 of 2 FirstFirst 12

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •