Yayz! You finally won't be balls-slow anymore! :smt030
Its time to start this thing, as you remember this summer i picked up a 4g63 head and a 14b turbo. Now that school is coming to a end im get to dump some money into the G that has been waiting patently.
what i have to start with
have'nt decided if im going to run the 14b or if im going to go with something bigger.
the parts list
4g63 head kit
4g63 timing kit
new rods
new pistons
rings and bearings
intercooler piping kit
intercooler
2g equal length exhaust manifold and down pipe
2g turbo ecu (eprom if i can find one)
2g wire harness
BOV
maf translator
wide band o2 sensors
aem ems
boost gauge
boost controller
oil pressure gauge
oil lines
2g distributor
cams? haven't (decided if im going to cam it)
adjustable cam gears
injectors
fuel rail
fuel pump
and a 5 spd swap with lsd.
im still forgetting stuff but thats the basic parts list that im going to have by the end of January.
The goal is to have it done by June or July.
pics of the head getting pulled apart tomorrow when i get done. Once it is all pulled apart im going to take it to work and throw it in the hot bath with all the components. My friends dad owns a grinding shop that is going to blanchor grind the head for me for a case of beer, also know some one with a dyno thats going to charge 200 dollars for a session, which the session time is as long as i need to complete the tunes.
Stay tuned.
Last edited by Galant306m; 12-05-2008 at 01:19 PM
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
Yayz! You finally won't be balls-slow anymore! :smt030
Got the head all pulled apart now time to have her hot bathed and get some head work done.
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
You should extrude hone that intake mani, or get a nicer unit.
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
OBX or Skunk2 cam gears???
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
Bought some stuff today that was on my list,pics when they arrive.
valve kit
innercooler
innercooler piping kit (comes with a bov that im not going to use)
skunk2 cam gears
obx equal length exhaust housing
arp head stud kit
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
What valve kit did you go with?
7g for life!
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
Stainless Steal Valves with lash adjusters and guides.
Last edited by Galant306m; 11-26-2008 at 04:53 PM
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
UPS Brought me something today.
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
Nice n shiny!
OZ Rally Crew #001, Quaife Club member :D
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
More parts came today :)
(I need to buy a digital camera cell phone pics suck.)
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
i would like to know wut size intercooler u got cuz i know 2 mine im going 2 have 2 get a 2inch think 1 so it fits behings a stock 96 bumper.. im prolly gonna get a 27x7x2
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
the one that i got is 27x9x3
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
Nice, should be nice to see once it is all done.
lookin good so far cant wait to see the finished product
i have a bid on ebay for these, and if you are said person that is bidding against me knock it off i need new seats damnit.
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
Bookmarks