Looks good. Could be done cleaner, but it looks really good for how easily it was done.
Forgive me for the pictures they were taken with a mobile phone
What you need:
-something warm to make plastic easier to cut I just used a lighter as it was accessible.
-a razor
-aluminum foil(possibly)
-krazy glue
Refer here to taking apart the shifter piece.
https://www.thegalantcenter.org/show...104#post471104
Now that you have it apart you will want to cut the top piece of the triangular light bulb holding bracket, probably about 1 cm in depth.
Then cut off the reflective tape piece and mount the bulb bracket where that was being held I used krazy glue cause it makes life ez. It should look like this.
Now I used aluminum foil to separate each section
Yeah not very professional also used krazy glue.
This is how it looks without using the aluminum foil to separate it.
Then I painted it blue and separated it and here is the finished product.
Yeah ez and pretty much free but its not a bad mod to do.
Looks good. Could be done cleaner, but it looks really good for how easily it was done.
Looks good..
I was just looking at this again and I just realized how much of a difference the aluminum foil made. I am thinking of other ways to do this to make it cleaner as a whole but nothing is really striking me cause of the way the light bulb bracket is. If you have any ideas post them if I like them I may try them out for a cleaner job.
No one else was interested in this mod?
i will do it as soon as spring comes:-))) i was think to do just Jeff's mod, but i will do also yours. Thanks for tut
my shifter lights stop working......they have a mind of their own now
they come on every now and then......haven't taken the time to look at it further
check the bulb and wires make sure nothings loose it should be lit when lights are on
Cool mod, but I have a shifter boot covering it up so I can't see it anyway.
This is the same MOD (except I used only one LED) I did to my car back in June of 2007. Lot of people here gave me crap about it... I see that some one else thought it was a good MOD too...
Nice work 03-Galant-ES
https://www.thegalantcenter.org/show...9&postcount=16
Last edited by LuvMyMitsu; 04-22-2009 at 06:41 PM
1999 Galant ESV6
Enkei RS6
Eibach Prokit on KYB GR-2
Yeah only difference was mine lights up letter too so you arent guessing which dot is lit up. I just did it cause we talked about it and I said it would be easy. I am covering the whole thing with a shift boot soon because I have an MDX shift knob and it doesnt look too good without a boot.
https://www.thegalantcenter.org/showthread.php?t=35933
it looks great but again could have been done a little cleaner, but i do admit i would have never thought of the aluminum foil. lol
Bookmarks