If you get it figured out, let me know :)Originally Posted by Armageddon Sunset
just to make sure do your wire colors match mine?
JDM mirror switch
green.....might be a faded blue
white.....might be white-yellow stripe hard to tell
black
yellow-blue stripe
yellow-red stripe
green-white stripe
green-red stripe
brown-blue stripe
brown-white stripe
blue-yellow stripe
black-yellow stripe
JDM relay
black
brown
brown-white strips
brown-blue stripe
brown-black stripe
red-black stripe
double post **
Last edited by nyjets985; 07-25-2009 at 08:39 PM Reason: oooopss
does anybody know how to wire these up so they will fold when you lock the doors with your remote ??
Why would you like to do that? The mirrors angle is not gonna be proper.
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
You need the remote relay to make it work.
That is only because the RHD mirror, but that is solved with cutting LHD mirrors.
...or using mirage glass
so when i park my car they will fold automatically when i lock the car ... wat is the rremote relay you talk about i didnt see any type of info on that while searching
can somebody do me a favor really quick.
i lost my oem mirror harnesses i think i threw them away so i am wiring the mirrors directly into the wires in the doors, but the colors dont match up, can sombody tell me what colors on the oem harness and coresponding colors after the pulg in the door.
i hope that makes sense.. the colors in my doors are
blue yellow
red yellow
green red
black
orange blue
and im supposed to have a white green and blue..? im a little confused..
okay i got it figured out but im still a little confused because my jdm mirror has 2 black wires coming out of it also, that dont seem to do anything, and there is no mention of them anywhere in this thread...
maybe they are for heating? i dont know, they are both black so maybe they are both grounds? but the mirrors still work without them plugged in so i dont know.
what did you guys do with the 2 extra black wires coming out of the mirrors?
You are correct, the 2 extra black wires are for heat, you got heated mirrors now. See if your car is prewired for them, my gtz had heated mirrors.
yea there are 2 extra wires on the harness too, one is black and the other is red and green i bleieve but i cant really remember.
does it matter which goes to which?
It's been years since I did my mirrors, but I don't think it matters anyway.
so i got an issue, i no longer have the pig tail that connected to the USDM mirrors. i needed to know which corresponding colors connect to what on the male connector. currently the colors on the male connector are:
Driver: Orange/Blue, Blue/Yellow, Red/Yellow and the
Pass: Red/Yellow, Light Green/Blue, Orange Blue
Luckily, I can use the following diagram to figure out the JDM function for the wire harness.
My issue is that I need to also find the function diagram for the USDM wires (which colors do what).
I have a 2003 ES, did this install according to Cali's wiring and everything powers up/folds/operates, except UP is LEFT, DOWN is RIGHT, etc.
Does anyone have the USDM diagram that tells what function the wires do? anyone else have this issue? Any help is much appreciated!
This was for a 7G:
Log in
Register
Reply With Quote
2002 Mitsubishi Galant GTZ
2001 Mitsubishi Galant GTZ
2003 Mitsubishi Galant ES
Bookmarks