I been thinking about it but i didn't know if it would work the way i was thinking.
1g/94GS ISC
1g ISC plug colors may differ, but the pinout is the same.
94-98 7g SOHC/ 95-99 Eclipse Spyder
Spyder ISC plug colors may differ, but the pinout is the same.
1g/94GS pins.......-.......7gSOHC/Spyder pins
.......1..................................5....... ...
.......2..................................1....... ...
.......3..................................6....... ...
.......4..................................2....... ...
.......5..................................1....... ...
.......6..................................4....... ...
There's a pin left on the 7gSOHC/Spyder plug. That's the ground pin-3. 1g Style ISC does not use ground - it uses two +12V and that's why pin 1 on 7g/Spyder plug needs to be spliced into two for pins 2 and 5 of 1g/94GS plug.
I been thinking about it but i didn't know if it would work the way i was thinking.
can we use it on stock setting?
by mean stock manifold, intake tube..etc
you could but it wont have any effect if the manifold istn ported
You would see some gains with the im unported I have mine unported and the 68mm tb on mine
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
I though 6g74 has a 65mm TB
But do port it. It makes all the difference in the world
Blackheart measured with calipers and said it was 68mm but yeah I will port the im when I get the chance
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
For people doing the DOHC swap or going turbo and not wanting to port the mani this also works for a 2G TB and IAC as they use the same IAC.
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
I grabbed a turbo TB from a 1991 talon TSi the wires are 1-6 in the order of your illustration
1-blue
2-red
3-yellow
4-black
5-red
6-white
Iirc black is always ground but it does have the two red wires you mentioned bit no green and instead of a white at 4 its at 6 and the black is at 4
Any input
Last edited by master_visionary; 01-10-2012 at 10:37 AM
Shout out to anyone that still uses hand tools for their work
With elbow grease for power and determination for a battery
Maybe your broke maybe your old school
Me I'm a lil of both
Bump
Shout out to anyone that still uses hand tools for their work
With elbow grease for power and determination for a battery
Maybe your broke maybe your old school
Me I'm a lil of both
Bookmarks