Well That is alot of heat for a fog light, and those would be some super bright fogs, I think you could save a few and just settle with the 35w and as far as i know the 880 bulb is interchangeable with the 893 in the stock 8g Fog lamp
Will I have any issues if I install a 3000K 880 55W Xenon HID Fog Bulb in my OEM fog light housings? I think the OEM wattage is 35W and wanted to be sure 55W for fogs would be ok.
Well That is alot of heat for a fog light, and those would be some super bright fogs, I think you could save a few and just settle with the 35w and as far as i know the 880 bulb is interchangeable with the 893 in the stock 8g Fog lamp
One of my Silver Stars burnt out (waste of money) so I bought these cheap. I paid no attention to the wattage, installed them, and then on the box notice they were 55W. They are bright and not as yellow as I would like. I am gonna get some new bulbs but wanted to make sure I wasn't going to have any overheating issues if I use them in the mean time.
Yeah...I am about to do a lighting overhaul on my entire car. I've gotta do some more research to decide what I want to do.
I am trying to decide between going with JDM heads or USDM projectors. Eventually I am gonna do a JDM old style conversion so that will play into my decision but from what I understand I can keep the USDM heads with the JDM bumper.
Yeah...I am going to customize my USDM Grille...not sure if projectors will look ok with the JDM old style conversion..
Been driving with 3k 35w hid's in my oem fogs for 2 years, never had an issue. Just recently swapped them out for projectors. 35w was bright enough, 55w would just be overkill.
Also if your going with a jdm front end then just get jdm heads as well. I've had these projectors since they were introduced and im tired of looking at them lol, but thats just me. I think JDM heads look better.
2001 5 speed 4g64T
Some old projectors I had from my retrofit before the ebay heads. Got em from a member here some years back.
2001 5 speed 4g64T
Yea it fit just fine after I drilled, and dremeled the fog light housing. Wasn't just a plug and play situation.
2001 5 speed 4g64T
Yea I fully understand, thats the whole reason I made my own.
2001 5 speed 4g64T
H1's, same as the ebay heads.
2001 5 speed 4g64T
I picked up some H11 projectors they should be here either today or tomorrow. If I like how they look I may be ordering some 3000K 35w Hids for them. For now I have all the wiring and 3000K halogens for them to see what they look like.
They are off an mdx and Ill let you guys know how they fit and post pics so yo can judge how they look.
Follow my build thread next week and Ill surely have some pics up.
https://www.thegalantcenter.org/showthread.php?t=39666
Bookmarks