i still have to setup my reverse lights. Mine don't work either
Quick question...any of you have the reverse lights come on when you put the car in reverse? I just got my reverse sensor from Bronxbomr (Thanx Al) and I am pretty sure I know where on the trans the thing goes. My problem is the connector that clicks in the back....I dont seem to have the right one or one at all. Anyone have any pics? Or do I have to swap the one from the auto (splice wires) and put on a 5 spd connector?
"Why fart and waste it when you can burp and taste it!"
i still have to setup my reverse lights. Mine don't work either
02 Mit. Galant 5 Spd -> 2010 Mit. Lancer Sportback 5 Spd -> (current) 2014 Mit Evo GSR 5 Spd
run1206's Rear Disc Tutorial
run1206's CF Hood Resurface Tutorial
The reverse sensors are a different length if I recall correctly but make sure you spliced the correct wires in the harness first.
Youll surely have to splice the wires... If i call correctly in a thread i read from somewhere it said the green and white wire were the ones.. IDK it will take a very long time to search for that too.
This might help....http://socallifestyle.com/tutorial/tutorial.html
yeah I am gonna have to try that ^^^ when he and I did my swap I didnt have the sensor. Now I actually need it! LOL
"Why fart and waste it when you can burp and taste it!"
If it's similar to the 8G 5 speed swap, you're gonna have to splice some wires. I used some old connectors I had sitting around and spliced one end into the car harness, and the other to the reverse solenoid, so that I could easily unplug it whenever needed
Last edited by beam514; 03-01-2010 at 09:30 PM
Oh boy its been a while... but i do recall splicing the wires.
u have to splice the wires
Not how fast your car goes but how good u drive going fast.
Drive It Like You Stole It!
7G Erubini Body Kit for sale
http://thegalantcenter.net/forum/viewtopic.php?t=57678
ill post up the wiring diagram when i get home.
From Boost Addicts to Carbon Fanaticsâ„¢ www.socalautowerks.com
Censee: Im trying to pimp some hoes for money for the lsd. 3/28/2011
Cali: Sig 3/28/2011
Thanx for the info guys! The help is much appreciated
"Why fart and waste it when you can burp and taste it!"
they were two red wires on the big plug from the auto tranny harness
^^^ok....and? Did they look different? Couldnt have been just 2 red wires...was it red with white stripes, red with green? So the big ass plug I have is the one from the auto trans....thats the one I gotta rip apart? Cool
"Why fart and waste it when you can burp and taste it!"
have fun
Lol I haven't hooked mine up either
03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub
After a few months of driving my 7g around I found out my brake lights came on every time I hit the clutch pedal or the brakes. Be sure to check that out too.
- Nick, 94 Galant ES - 4G64 DOHC Turbo AWD, E3-16G & Manifold, 780cc inj, fmic, DS-MAP Speed Density
"Ignorance more frequently begets confidence than does knowledge..." - Charles Darwin
^^Nah...all my lights work properly...I just have no reverse lights thats all
"Why fart and waste it when you can burp and taste it!"
it's the last picture at the very botton of my 5spd swap tutorial:
http://socallifestyle.com/tutorial/tutorial.html
you can splice or you can get some spade connectors for each wire so it can be unplugged in a pinch
I have some connectors. I am just gonna cut the wires and crimp em into the connectors and plug em in. I dont need the plug from the auto anymore so...
Thanx guys! I'll keep yall posted
"Why fart and waste it when you can burp and taste it!"
anyone have a pic of where on the top of the 5spd trans where the sensor goes? nwhere I think it goes...the bolt wont move so...
"Why fart and waste it when you can burp and taste it!"
Bookmarks