Are you going short ram or cai?
you can find coupler reducers at your local auto parts store, if thats what your asking the round part of the rubber coupler shoul beable to pull over and shape to the oval shape then just clamp down.
hey i have a 1994 galant s and i wanted to put an new air intake on it. i noticed that that the air flow master sensor is shaped like an oval instead of a circle......fml i cant find anywhere for the part im needing to took it up to the manfold... but i have all the other parts....
Are you going short ram or cai?
you can find coupler reducers at your local auto parts store, if thats what your asking the round part of the rubber coupler shoul beable to pull over and shape to the oval shape then just clamp down.
there are MAS adapters sold on ebay and for the rear oval shape you can get a rubber coupler off the plumbing isle in home depot 4'' to 3'' reducer, or you can get the more expensive silicone reducer off pepboys. Then you need a 45 deg or 90 deg 3'' bend and then a 3'' to 2.5'' reducer to the TB
I'm building Intake currently , next week i might post HOW TO with pictures.
you can just copy and paste from all the pms i sent you :)
ive got a short ram with a 4.5 inch turbo eclipse adapter plate
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
thanks everyone! i just need to go get that rubber part lol
Bookmarks