yes. as a group, members have replaced every single bulb on the car w/ LED's (or HID for the headlights and fogs) including the HVAC, mirror/fog switches, stock radio, vanity, and dome lights. search this board and you will find all the info u need.
Hey all,
Just wondering if anyone's ever replaced their interior lights with LEDs. If so, what kind did you use and where did you get them? Also, how did you do it? I managed to pull out the assembly and take a peek but wasn't able to do much.
Thanks
I've done the dome lights, tails, and fogs... They look pretty good
-Andrew
I was wondering if anyone knows how to replace the stock map/reading lights on a 9g. I have tried to pry the plastic lens off, but to no avail. I also tried prying the plasting assembly around the entire area of the map/reading lights and there is so much resistence it feels like something is going to snap. Any/all help would be greatly appreciated. Thanks
Last edited by wicked380; 02-09-2011 at 07:25 AM
wicket380, are those led bars under your front seats wired into your car or are they plugged into a 12V?
Front just pull the whole assembly. The rear remove the lenses with a tiny flat head or pick.
Nice. I would like to see this installed on a steering wheel. lol
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
For future reference for anyone with a 9g wanting to replace map/reading lights with LED's. You definitely have to pry the entire assembly down from the front using a flat head (I used two, one on each side to apply even pressure). There will be a lot of resistence, there are 2 tabs in the front right/left that secure a metal bracket on each side, they simply pop out once pulled down far enough. That was as far as I went, since I was able to pull/replace the bulbs after I lowered the front assembly portion.
Bookmarks