The Galant Center - Powered by vBulletin

Thread: Need help finding Fed Spec headers!!

Showing results 1 to 15 of 15
  1. #1

    Need help finding Fed Spec headers!!

    Hey im new to TGC and I just want to know if anyone knows who sells Fed Spec headers for a 2000 4cyl. Galant. I have already searched the forums and could not find any answers.

  2. #2
    y do you want fed spec? y not just upgrade if your replacing?
    2002
    4g64 dohc turbo 5-speed
    gt30r @20psi stock block,mbc
    2.5" tbe
    evo 8 ecu and maf
    large fmic w/ cx racing intercooler pipes
    wrx injectors @ 100psi fuel pressure

  3. #3
    I mean I have a fed spec galant what other kind can i use?

  4. #4
    you could just get some aftermarket ones since your gonna have them off anyways might as well get something a little more performance then stock right? check some of the vendors from this site or if your on a tight budget check ebay or cl lol or if you want i got my old cali spec headers ill give you for 5$ and the price of shipping XD.
    2002
    4g64 dohc turbo 5-speed
    gt30r @20psi stock block,mbc
    2.5" tbe
    evo 8 ecu and maf
    large fmic w/ cx racing intercooler pipes
    wrx injectors @ 100psi fuel pressure

  5. #5
    2002
    4g64 dohc turbo 5-speed
    gt30r @20psi stock block,mbc
    2.5" tbe
    evo 8 ecu and maf
    large fmic w/ cx racing intercooler pipes
    wrx injectors @ 100psi fuel pressure

  6. #6
    O yeah i was not bout to get stock headers Im looking for performance heads. So far the only fed specs I find are for the eclipse. Now i know the 8g galant and the 3g eclipse have the same motor can i use those and they are Megan headers

  7. #7
    Now those got a hole for a o2 sensor and mine are a little bit shorter

  8. #8
    those ones should be a direct fit to any 4cyl galant but if your gonna go with megan headers then do it XD.
    2002
    4g64 dohc turbo 5-speed
    gt30r @20psi stock block,mbc
    2.5" tbe
    evo 8 ecu and maf
    large fmic w/ cx racing intercooler pipes
    wrx injectors @ 100psi fuel pressure

  9. #9
    I just wish the Megans were either long tube or 2 piece to either go to the cat or delete the cat

  10. #10
    lol where do you live? if theres inspection then i wouldnt do that.
    2002
    4g64 dohc turbo 5-speed
    gt30r @20psi stock block,mbc
    2.5" tbe
    evo 8 ecu and maf
    large fmic w/ cx racing intercooler pipes
    wrx injectors @ 100psi fuel pressure

  11. #11
    Man im in Alabama we dont have inspections down here. I mean not that i know of

  12. #12
    Some people just go straight pipes down here or they delete the cats.

  13. #13
    though you wont gain much if anything from doing that unless you do some work on the intake side too.
    2002
    4g64 dohc turbo 5-speed
    gt30r @20psi stock block,mbc
    2.5" tbe
    evo 8 ecu and maf
    large fmic w/ cx racing intercooler pipes
    wrx injectors @ 100psi fuel pressure

  14. #14
    I already have a short ram intake and a cat-back exhaust

  15. #15
    will obx headers for the 8g 4g64 galant, delete the first cat??(on cali spec) been searching around for a few days and have yet to find the answer..

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •