Dual piston brake upgrade and rear disc

[kolio]

You are confused. There are no dual piston rear brakes that are bolt on. When it comes to the dual pistons we are talking about the front brakes.

evo brembos are 2 piston rears...... and they bolt straight up

3000gt vr-4 rears are 2 piston rears...... and they bolt up


but i still think the OP is confused

[mysticj]

evo brembos are 2 piston rears...... and they bolt straight up

3000gt vr-4 rears are 2 piston rears...... and they bolt up

But what rotors to use? Especially for those who still run the four lug rear disk setup.

[kolio]

But what rotors to use? Especially for those who still run the four lug rear disk setup.

dohcstunr still runs his gs rotors with rear evo calipers. he just re drilled them for 5 lug setup.

stock 2G and 8G ones work fine too

but if your 4 lug you need gs rotors

[Apex91]

You are confused. There are no dual piston rear brakes that are bolt on. When it comes to the dual pistons we are talking about the front brakes.

nevertheless was I correct in my conclusion of pulling the hub/rotor/caliper assembly and bolting right on?

[Galanttuner10]

for the front just pull the old stuff caliper and rotors, then slide on some 6g vr4 rotors and some 6g/1g dual pistons or 2g dual pistons. with 2g you bolt all the new setup on then just switch the lines as the dual piston 2g is the exact same banjo bolt