3000GT 4pot help

[master_visionary]

That's incorrect

[kolio]

So the VR4 rotors are only 12.6 inches? Interesting as stock are 14 inch and the awd are 15 inch.

there is no stock mitsubishi rotor over 12.6

2nd gen 300gt vr-4 rotors are the same size (just only a few MM shy) of evo rotors

stock galant rotors are like 10.8 inches lol

[kolio]

I saw that and like I said those purple calipers are sick ....what are your rears??

the rears are stock ATM. however i will be going with evo 8 2 piston calipers.

2nd gen 3000gt VR-4's have 2 pot rears but you need spacers and other stuff.

evos bolt straight up!

[master_visionary]

Maybe he measured the rotors with the wrong side of the ruler :-)

Wow not even a disk swap kolio
I was thinking of doing my 5lug and rear disc before it even hits the road again
While I do this turbo build .

I just swapped the wastegate actuator on my T25 more small fabricating to be done

[kolio]

Maybe he measured the rotors with the wrong side of the ruler :-)

Wow not even a disk swap kolio
I was thinking of doing my 5lug and rear disc before it even hits the road again
While I do this turbo build .

I just swapped the wastegate actuator on my T25 more small fabricating to be done

Ohhh hell no. I am rear disk swapped some 4 years. Back when i was 4 lug

[Galanttuner10]

Maybe I read the part spec in ASA. It stating 15 may just mean it needs at least a 15 inch wheel to clear the assembly.

[master_visionary]

7G stock KS only 14

Greg kolio yours and mko 7Gs are my style I just prefer our separated tails to moo

[kolio]

Maybe I read the part spec in ASA. It stating 15 may just mean it needs at least a 15 inch wheel to clear the assembly.

Probably. I wish there were bigger rotors lol. But any bigger and then the rims would need to be 18's

[Galanttuner10]

Stock 7g/2g fwd brakes require 14 inch wheels. That's what the part spec must mean.

[kolio]

here is a link to the rotors

http://catalog.brakewarehouse.com/Sh...Rotors&mode=PA

[master_visionary]

I need you to upgrade so I can save up for you rotors :-)

[Apex91]

Stock 7g/2g fwd brakes require 14 inch wheels. That's what the part spec must mean.

So what size wheels do I need for this swap? would they fit with 15's? I really really want those same OEM alloy 4 lugs that your using GT

::edit::

I feel dumb. clearly this requires me to swap to 5 lug v-v

[master_visionary]

17 if 16s fit its rellly tight

[Galanttuner10]

So what size wheels do I need for this swap? would they fit with 15's? I really really want those same OEM alloy 4 lugs that your using GT

::edit::

I feel dumb. clearly this requires me to swap to 5 lug v-v

if you go to 1g or 2g dual piston brakes and get 6th gen vr4 rotors you can stay 4 lug and clear 15s

[master_visionary]

Yup there's a 2pot tutorial on here

[kolio]

So what size wheels do I need for this swap? would they fit with 15's? I really really want those same OEM alloy 4 lugs that your using GT

::edit::

I feel dumb. clearly this requires me to swap to 5 lug v-v

I have 4 lug 6G VR-4 rotors and 2 piston calipers for the 7g.

[master_visionary]

I have 4 lug 6G VR-4 rotors and 2 piston calipers for the 7g.

How much do you want I can give you like $40 and send you a flat rate box if its bolt on
I know that's low but ill be able yo get em like next two weeks

[kolio]

How much do you want I can give you like $40 and send you a flat rate box if its bolt on
I know that's low but ill be able yo get em like next two weeks

i have a buyer. i need to make some money, this car is going to be going in for work soon. i don't want my butt to be sore lol

[Apex91]

Are there any 4 pot options that allow me to stay with the OEM alloys that Galanttuner10 has? I suppose Wilwood or StopTech could fab up a custom set up for me, but id like to stay all mitsu if possible

[mko]

nope, youll at least need evo8 wheels