CAI - Fujita - Do it yourself
Springs - Get WORKS - If you have the equipment you can do it yourself. Get bumpstops if your area has lots of pot holes.
Headers - RIPP or OBX - You'll probably need a shop.. This isn't easy, and you might also need to stack the O2's (space them out a little).
**NOTE**
- If you get headers you'll also need motor mounts.. the engine will flex under pressure and the headers can hit the frame of the car. Not good.
- If you get headers you'll also need a ECU reflash... Your car will run rough with out it as your AFR's will be off. Or you can get a harness...I'd recommend the reflash, it's safer and since you can't get your car serviced over there probably a better bet as it's a "set it and forget it" kinda thing.
[email protected] does the reflash, ask him about options.
Hope this helps,
-M
Bookmarks