I really like how it turned out so far. Any ideas are welcome
Ok I made this post to sum up all the things I'm doin to my g. Well for those of you who have seen it, Any suggestions? I wanted to lower the front but idk how much. I'm on 225/45/17. I'm open to any other suggestions. And before anybody says something, I already have 3rd gen jdm tails that I need to install. Thanks in advance
Those are 4 blue led strips in my trunk
Tein S-Tech springs will lower you enough to get rid of the gap and even out stance.
Tails must be JDM asap!!
And then burn those horrendous tails with fire and pour duel on them every 20 seconds. Lol!!
tails dont HAVE to be JDM
i see u already have them tho, GL with ur progress
Lmao thanks guys I just need help with installing them because one has a harness an the other just bulbs and wires. I have a stock harness can I convert that?
Fix your rear bumper... Its an eyesore.
Other than that, keep it clean.
If you post stupid and incorrect information, you will get red nuggets.
Eh, those wheels looked better silver. You have a pretty much all black car with these bright white wheels, doesn't flow with anything.
Install those JDM tails, nab a set of Tien springs (get some KYB AGX's to go with them) fix the rear bumper and you're off to a good start.
Looking good. Yeah you need to fix bumper. I have my old oem bumper i could get it painted your g color at my shop. Pm me to give you a price if you interested.
Yeah can you believe I pulled over to the side of the road behind parked cars since I was lost in Brooklyn and this ASSHOLE fucking hits me and dips...ON THANKSGIVING
yeah those wheels would look better silver..
but the tails really arent that bad i would try to take them apart and paint the chrome things black though.
So I bought 2 48 led switch back 1157 for my front turn signals and bought 2 resistors for them. My question is I saw that 3 ohm 50w solves for the front and the back and 6 ohm 25w solves for one signal (total of 4 for all signals) Now I got a pair from ebay that says 6 ohm 50w....wth? Will I only need these 2 for rear and front or would I need 4 of these?
It's not a particular brand name, but I got it off of ebay months ago no probs at all, my friend who's a mechanic installed it and was surprised how it wasn't cheap. It's a catback exhaust for the 2.4L and it was only 135 SHIPPED
So I was clearing my needles today in the gauge cluster and i have no idea why but the rpm needle broke! I took it out and was holding it while clearing it and my crip split it in half! Is there a place where I can get another needle?
Bookmarks