added new info. Check page 1
There is no universal ROM. Every rom is unique with there memory locations. They all have knock filtering not knock sensor on the Galant it needs to be added via hex. The thing is to define it and find the correct locations. You can't just copy one xml to the other. Universal ROM..... MAYBE. I would say.... 2001-2003 we could use any rom on the PCM. Like you could use my 02 rom on a 03 PCM.. but you need to get the immobilizer out. 99-00 could use the same rom.
I pm'd spd_frk like 3 weeks ago and no response lol :( if I were to retune my car can I do it via obd-II CABLE and laptop?
02 Mit. Galant 5 Spd -> 2010 Mit. Lancer Sportback 5 Spd -> (current) 2014 Mit Evo GSR 5 Spd
run1206's Rear Disc Tutorial
run1206's CF Hood Resurface Tutorial
update on a 2000 Galant PCM map
3 maps. 3 fuel, 3 timing. First time i have seen on the galant PCM. Only the evo9 have 3 to 4 maps.
Get used to working with it ;) he he he
Its like Chinese to me right now. But later down the road ill be picking it up slowly. I have a 2000 pcm hope thats a good start!
Only sonata f5m42 swapped. N/A build in motion.
Doesn't really matter what u have Isaurio is da shit!!!!
V6 or I4?
94 Galant GS: 4G67 head, 1G IM, Evo 8 TB, DeltaCam 272/264 Cams, Test Pipe, OE Avenger V6 60mm catback w/muffler, modified Outlander header, DIY COP setup, B/S delete, 315cc injectors, AEM UEGO WBO2, Black case 3G ECU
1994 GS FYI
DSM/CSM Manuals
I know this might be dumb but will this allow you to re flash and turbo with the stock ecu even an auto?
Yes "BIG MAPS ONLY". Better resolution for tune. And stock pcm is not limit to 100 load. It could read and give timing and fuel calculations for 100+ loads. This is only done on the big map patch rom. No on stock rom.
Stock rom could be tune for smoothness to give better performance but not for boost.
so i have an 01 gtz manual swap, how would i go about clearing the trouble codes?
Hey one thing isaurio, I saw what I need to tune my engine, but seeing as you seen to know coding I'm trying to add in all the prices for CAPS ASA 8 g galants as a summer project. I have managed to get a scraper to give me the part numbers and prices of parts off a mitsu parts website. I have seen it done where in caps you get external prices via an .txt file I tried to this and put my info in a .txt file and it did not accept my files eveb though I put them in same format as the one that had worked (from 3si 3000 GT site). I tried looking at spacing of numerals etc any thoughts?
Sent from my BlackBerry 9360 using Tapatalk
anymore progress on this Isaurio?
94 Galant GS: 4G67 head, 1G IM, Evo 8 TB, DeltaCam 272/264 Cams, Test Pipe, OE Avenger V6 60mm catback w/muffler, modified Outlander header, DIY COP setup, B/S delete, 315cc injectors, AEM UEGO WBO2, Black case 3G ECU
1994 GS FYI
DSM/CSM Manuals
If you have tactrix 2.0. If you send me your rom i could help you out with the trani codes.
Send me a pm for more info.
I'm not understanding your question. What exactly you want to accomplish?
I have worked and running with my 2.4L big map for about 3 months now, Testing, adjusting and trying to avoid knock. so far i tune up to 100 loads. Soon i will test the big map for boost reading, meaning to get reading above 100 loads. Right now it is set to 200 loads at 7500k RPM let see if i find any bugs.
If it works i will start making a standard basic base rom for members to try. This is going to be base on my 2.4L 02 ROM stock rom.
NOTE: this is a 512Kb SH rom Late 01-03. People using the H8 ROM is only 128Kb wont be able to flash the rom due to the small memory block. This is 99-early 01.
Bookmarks