Oh ok what was the name of the tape?
IMO for the time being I'm thinking ita only because of the ride height, and missing cladding. I know 3m supposedly has a an adhesion promoter you can get too
But yeah a clean surface is critical. Also which tape did you get, cause I know they have a molding tape you can get at autozone. It was strong enough to attach some fog lights I got for my old s14 once, in an upright position on the bumper. It held even til the day I decided to remove them (oem later ftw)
car looks really good man. Keep it up!
IIRC
Yeah I plan too. I did the cladding that needs to be adjusted and just need to get the front and rear fenders. I'm also working on meshing out the stock grill and retrofitting the fogs. I have fender flares that need to be painted and idk how to put them on properly and I also have an obx header and a v6 tb that needs to go in but I'm waiting to get an Outlander IM. I just got a little license plate relocate kit and still contemplating on where to put it and white gauges that may want to put on since I like my blue lights already in there. In the future I'll drop it, I don't have the finances now tho.
Forgot to post this up. I did the license plate relocate at the corona bbq
I just need to sand where it was and fill it up, sand again, and repaint it. Since I used screws just to screw it in to the bumper, I'm wondering if I can get a piece of sheet metal and cut it the same size as the plate to give it backing and make holes in the plate and sheet metal in the center on both sides so i can screw it to the bumper like how lancers have it. Don't get me wrong i like this but it looks a little awkward and I ideally would like it on the side. The locator wouldn't fit there evenly and since it only mounts on from the top, it'd block the headlight or foglight. My theory is if the plate is screwed in the middle on the bumper, it may clear both
Looks fine where it is leave it alone!!!!
Ok I'll leave it then and another question, I have the angel eyes with my retrofit and they don't work even when hooked up to power, so do I need some kind of relay? That's the only thing I can think of.
Did they come with transformers? What brand? And where did u get them from? yea the plate looks good where it is that's where I put mine but I didn't use no fancy bracket like you did, I saw u tinkering with that thing at corona
They came with a power supply that you had to plug them into from TRS but when I tested them against the signal wires they didn't work so that's why I think it needs some kind of relay
Yeah I kinda see that and I'm getting mixed reviews as well. My buddy recommended it to me since it looks good on his corolla but that bumper is big as hell where ours isn't, but I may experiment with that. Thanks about the heads, wasn't as hard as I thought and they're beautiful
Yeah I see what you mean hence why I wanted to test my hypothesis by putting it on the side like where the lancers have it.
Too add to what relax said, check the polarity and make sure you arent connecting to the turn signals.
Sent from my Rooted Droid X using hacked Tapatalk 2
Hey I haven't posted in a while but I took out my blue bulbs in the cladding and put these white ones in
I forgot the blue bulb for the mileage part of the odometer but I think it looks pretty sweet. I have the white bulb so i might swap it so there's continuity.
I also have the cladding on but for some reason the rear driver door one is damage and everytime the door is opened, the split part of the cladding slides in between the driver door and driver cladding. How can I fix that?
Bookmarks