you only cross the lines over if you have the outlander intake w/ its egr system, the egr system is abit different compared to the stock egr systems that come stock.
i have the outlander intake, and 6g72 TB, and i have my lines crossed, and she runs great, still needs a tune,
as for the 74 TB and outlander mani, im not sure if you need the lines crossed,
i
Last edited by finald8ta; 10-06-2012 at 04:32 PM
i just read the entire thread, if you intake is crack then the car is not going to run right because you have un metered air coming in, get a new intake mani and try again.
i was drunk at the time...
^ line cross with the outlander mani only. Since the evap and egr system are different path.
If u having issue with the stock intake mani and the 74 tb check any vacuum leaks. Also check the iac pig tail wires are correct. Also check the tb gasket is not put the wrong way. U put a 74 gasket right?
Ok got it, I'm doing my outlander IM swap on thursday so that should fix everything.
IAC pigtail wires I'm 100% sure they are correct since I did them carefully and one wire at a time to be sure everything was correct
I'm also sure the gasket is how it should be I've installed it a few times and when you see it there's no other logical way to install it.
Thanks for the info, I'll update the thread once the IM is installed.
4g64T 5spd
I had a vacuum leak using just the 74TB gasket so im using both the 64&74 gaskets. My 64TB gasket is made of a metallic material while the 74TB gasket was just thin paper.
Last edited by Rach3T8G; 10-08-2012 at 09:06 PM
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
Did you get your gasket from the dealer?
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
yep, cost me like $8
4g64T 5spd
P0401 Exhaust Gas Recirculation Flow Insufficient Detected
Have this code what to do, change the EGR valve?
4g64T 5spd
Bookmarks