Well, technically this shouldn't be in this forum but I got a 1/2 drive instead of the normal 3/8 drive. The 1/2 ones seem to have higher torque capabilities plus I wanted to use it also as a nut breaker to unseat my bolts. Anyway with that adapter the profile will be too high off of the bolt so I'm going to prob. return it because I don't need rediculously high amounts of torque like 200+ ft/lbs. Our brakes (8G us) require 28 ft/lbs for the guide and lock pins and 66-81 per manual for the caliper/hub bracket. FYI.
L
Bookmarks